







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Inglewood, CA: What You’re Actually Getting
Paver driveways in Inglewood, CA run $7,000 – $18,000 installed, and most jobs take 4 – 7 working days from demo to final sweep. The typical range lands near $9,500 – $13,000 for a two-car driveway on a standard 800 – 1,200 sq ft apron, with base prep, edge restraint, and polymeric sand included. Call (833) 842-7204 for a free on-site estimate with itemized pricing.
How We Install Paver Driveways in Inglewood, Step by Step

The schedule matters here because Inglewood permits and inspections run through a building department that has been stretched thin by stadium-district volume. Here’s the sequence we follow on most residential jobs.
Day 1: Site walk and demo
We walk the existing apron, mark utilities (the 811 call happens before we touch anything), and cut out the old surface. An 800 sq ft asphalt driveway comes up in one day with a skid-steer and dumpster on site. You’ll need to move cars to the street and keep the garage clear.
Day 2 – 3: Excavation and subgrade
We excavate 8 – 10 inches for a residential driveway, then compact the native soil and set the subgrade slope. Drainage away from the garage is the decision that matters most here. On tight Inglewood lots, we often need a trench drain or a strip drain at the apron lip because the driveway drains toward the street, not the yard.
Day 3 – 4: Base and compaction
Class II road base goes in at 4 – 6 inches in 2-inch lifts, compacted with a plate tamper and checked with a slope level. This is where most DIY driveways fail, and where cheap bids cut corners. Base compaction is the difference between a driveway that holds for 25 years and one that ruts in three. We don’t skip lifts.
Day 4 – 6: Paver installation
Pavers go down on a 1-inch bedding sand over the compacted base. A crew of three sets 300 – 500 sq ft per day. You decide edge restraint type (concrete curb vs. plastic edge) and the pattern. Running bond is standard; herringbone costs more in labor and cuts.
Day 6 – 7: Finishing and inspection
Polymeric sand goes in the joints, a plate compactor vibrates it in, and we sweep and water-cure. If the driveway crosses a public sidewalk or expands the curb cut, the City of Inglewood requires a right-of-way permit and a final inspection before we hand off. We pull that and manage the inspection.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Before We Cut a Single Stone
Paver driveways in Inglewood is a materials conversation before it’s a labor one. Here’s what you’re actually picking between.
- Concrete pavers vs. clay brick vs. permeable units: Concrete pavers (Belgard, or equivalent) run $6 – $12 per sq ft in material and hold up best to the driving loads on a residential apron. Clay brick costs $9 – $16 per sq ft and looks better on a 1930s bungalow, but chips on impact. Permeable pavers with open joints cost 15 – 25% more installed and need a gravel reservoir base, but they handle LA’s occasional heavy rain better on clay-heavy flats soil.
- Thickness and grade: 60mm is standard for residential driveways. 80mm is what commercial jobs use and what we spec when a truck or RV parks on the apron. The upcharge is roughly $1 – $2 per sq ft.
- Pattern: Running bond is the default. Herringbone at 45 degrees adds about 10 – 15% to labor. Basketweave is decorative but offers no structural benefit on a driveway.
- Edge restraint: A poured concrete curb is the longest-lasting edge; plastic edge restraint is cheaper but can heave on soft subgrade. On Inglewood flats lots with soft soil, we lean concrete.
- Color and finish: Standard gray or tan is cheapest. Tumbled and multicolored finishes add 10 – 20% to material. Honest trade-off: color variations hide oil stains and tire marks better; solid gray shows everything.
What Paver Driveways Costs in Inglewood, CA

Most paver driveway installation in Inglewood lands between $7,000 and $18,000. Here’s what pushes a job up or down.
| Line item | Typical range |
|---|---|
| Paver driveway installation (800 – 1,200 sq ft) | $7,000 – $18,000 |
| Demo and haul-off of existing surface | $600 – $1,800 |
| Base and compaction (Class II, 4 – 6″) | $1,500 – $3,500 |
| Right-of-way permit and inspection | $250 – $900 |
| Drainage correction (trench or strip drain) | $500 – $2,200 |
Size is the biggest factor. A 400 sq ft single-car apron sits in the low $8,000s; a 1,600 sq ft RV width pushes toward $18,000. Existing condition matters: if the old concrete is 8 inches thick with rebar, demo adds a day and $800 – $1,600. Soil on the flats can be clay-heavy and needs more base. Permit scope climbs fast if the driveway crosses a public sidewalk and expands the curb cut. Material grade accounts for roughly 35% of the total, so upgrading from standard concrete pavers to clay brick can add $3,000 – $5,000 on the same footprint.
A written estimate from us lists demo, haul-off, base, compaction, pavers, edge, sand, permits, and inspection as separate lines. What isn’t in it by default: drainage correction if we find a problem after demo, tree root removal, and any utility relocation. We flag those before we sign, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Inglewood Homes Specifically Do to This Job
Inglewood is dominated by 1920s – 1950s single-family bungalows and small stucco duplexes on tight lots, and paver driveways on these properties run into two problems you don’t see on newer construction. First, the old asphalt or concrete apron usually doesn’t drain correctly because it was poured before modern grading standards. Second, the flats west of Prairie Avenue hold original knob-and-tube wiring in detached garages and often unpermitted additions, which means when a driveway permit triggers a City of Inglewood inspection, the inspector may look harder at everything else on the property. We’ve seen permits flagged for review simply because the inspection pulled up unpermitted garage conversions behind the house. Second, the marine layer off LAX brings salt-laden air and moisture cycling that ages exposed steel and stucco fast; edge restraint, rebar in any concrete border, and metal drain grates all need to be corrosion-resistant or they’ll pit within a few years. We spec stainless or galvanized hardware for that reason.
Our technicians have up to 12 years of experience with Inglewood slabs, clay-heavy subgrade, and the tight-lot drainage corrections these properties need. This is typically part of a larger Driveway & Pavers in Inglewood scope when the front yard is being redone at the same time, and we handle both in a single permit window.
Serving Inglewood, CA – Our Local Coverage Area
We serve Inglewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Inglewood

Most jobs run 4 – 7 working days. A single-car apron can finish in 4 days; a full two-car driveway with drainage correction and permit inspection usually hits 6 – 7. Add a week if your permit goes to plan check because of unpermitted work on the property. Call (833) 842-7204 and we’ll give you the real schedule for your address.
It depends on whether the work touches the public right-of-way. A straight replacement inside your property line often doesn’t require a permit. Any change to the curb cut, sidewalk apron, or a driveway that widens the opening onto a public street requires a City of Inglewood right-of-way permit and a final inspection. We pull the permit when it’s required and manage the inspection so you’re not the one chasing the inspector.
Usually yes. The driveway sits above the soil, so it rarely conflicts with plumbing or gas lines in a way that requires relocation. Utilities on Inglewood flats properties occasionally run under the apron, including older gas lines and irrigation. We call 811 before demo and if a line runs shallow, we hand-dig around it. The cost stays in the original estimate unless rerouting is genuinely needed.
Most jobs land between $7,000 and $18,000. A small apron in the 400 – 600 sq ft range sits in the low $8,000s; a wide RV-ready driveway with drainage correction pushes toward $18,000. Square footage, existing demo, base depth, drainage, and paver grade are the five variables that move the number. Call (833) 842-7204 for an exact itemized quote – estimates are free and we come to the site.
Every installation carries our 730-Day Done Right Promise. If settling, joint sand loss, or edge failure shows up during those two years because of our workmanship, we come back and make it right. Paver manufacturers cover their own product defects separately, and we walk you through that warranty sheet at handoff. Homeowners often pair this with Door Installation in Inglewood or Cabinets & Countertops in Inglewood if they’re doing a full front-to-back update while we’re on site.
Schedule Your Free Paver Driveway Estimate in Inglewood
We’ll walk your driveway, measure the footprint, check drainage, and hand you a written itemized estimate for paver driveways in Inglewood before you commit to anything. A live person answers the phone any time, day or night, and we schedule the site visit around your hours. Every project comes with upfront pricing and the 730-Day Done Right Promise. Call (833) 842-7204 to set it up. You can see the wider scope on our Driveway & Pavers service and confirm coverage on our Inglewood service-area page.
Written by the team at Groundwork Construction Co.












