







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Florence-Graham, CA: What It Takes and What It Costs
Door Installation in Florence-Graham usually runs $400 to $1,200 per exterior door for a standard unit, and $1,800 to $4,500+ when you move up to a heavy-duty insulated entry, a shop door for a detached garage, or a security-rated unit. A single door goes in during one visit; a full exterior swap on a 1950s bungalow runs two to three days once we’ve measured, ordered, and prepped. Call (833) 842-7204 and we’ll walk your openings and give you a written number before anything gets ordered.
How We Run a Door Install Here, Stage by Stage

The sequence below is what a real job on a Florence-Graham bungalow looks like. Every stage has a decision that belongs to you, and we won’t move to the next until you’ve made it.
- Stage 1 – Walk and measure (day 1, 60 to 90 minutes). We check the rough opening, the framing, the header, and the finish floor height. Old stucco walls on these houses are rarely square, so we measure at three points and note the shim and flashing plan. You decide which doors are in scope and whether any opening is moving.
- Stage 2 – Product selection and order (day 1 to 3). You pick the material, the swing, the hardware, and the threshold. Lead times run 3 to 10 business days for stock sizes and 3 to 6 weeks for custom. This is the longest stretch of the job, and it’s where a bad call gets expensive.
- Stage 3 – Demo and prep (day 1 of install, 2 to 3 hours). We pull the old door and frame, inspect for rot, and repair the sheathing and sill. If we find hidden water damage, we stop and show you before going further.
- Stage 4 – Set, flash, and seal (same day, 3 to 4 hours). New door goes in plumb and level, shimmed at the hinge and strike sides, flashed correctly at the head and sill, insulated, and sealed. We test the swing and the latch before we call it done.
- Stage 5 – Trim, hardware, and walkthrough (final 1 to 2 hours). Casing, weatherstripping, and deadbolt go on, then we walk it with you and hand over the paperwork. Any punch items get handled before we leave.
For a homeowner who wants this done right in one trip, the whole thing from walk to walkthrough is typically one to two weeks of real time, most of it waiting on the door.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Door material is the decision that drives cost and long-term behavior. Here’s the honest trade-off on each.
- Steel entry doors. The workhorse choice for a Florence-Graham bungalow. Durable, affordable, holds paint well, and takes a deadbolt without fuss. Downside: dents under impact and can rust at the bottom edge if the sill isn’t flashed right. Suits most front and side entries.
- Fiberglass entry doors. Won’t dent or rust and takes a stain or paint finish. Costs more than steel and the surface can dull over years of sun. A good fit for a front door you want to look like wood without the upkeep.
- Wood doors. Warm look, real weight, repairable. Requires repainting or sealing every few years against the dry heat. Best for a covered porch or a door under a deep overhang.
- Heavy-duty shop and garage service doors. If you’ve got a detached garage or workshop out back, this is where the acreage-property mindset matters. A 36-inch solid-core or steel service door with a reinforced frame handles daily use and locks down better than a hollow unit. We spec these heavier because a flimsy door on a detached shop is a security gap, not just an inconvenience.
- Hardware and glass. Deadbolt grade, hinge material, and whether you add a window or lite change both the price and the security profile. We’ll show you the difference between a builder-grade knob and a proper lockset.
Brands we work with on door systems and the surrounding envelope include Atlas and PGT where the door ties into a larger opening or glazing package. If the door work is part of a full Windows & Doors in Florence-Graham scope, we coordinate the whole envelope at once so the flashing and trim all line up.
What Door Installation Costs in Florence-Graham, CA

Here’s the line-item picture you can plan against. These are real ranges for this market, not national averages.
| Scope | Typical range |
|---|---|
| Single exterior door, standard size, stock material | $400 – $1,200 |
| Heavy-duty entry or solid-core door with premium hardware | $1,200 – $2,500 |
| Detached garage or workshop service door | $600 – $1,800 |
| Multiple doors, same visit | $1,800 – $4,500+ |
| Custom size, glass lite, or widened opening | $2,500 – $5,000+ |
Five variables push a job from the low end to the high end. Size and material grade come first: a stock steel 32-inch door is the floor, a custom fiberglass unit with a window is the ceiling. Existing condition matters: rot in the framing or a rotted sill adds repair hours. If the opening has to move, you’re into framing, drywall, and paint, which is a different number. Hardware and glass add cost but also add value and security. And permit scope: a simple swap usually doesn’t need one, but structural changes or an egress door on a converted space will, and that adds time and fees.
A written estimate from us lists the door, the hardware, the flashing and sealant, labor, disposal of the old unit, and any framing repair we can see up front. What it doesn’t cover unless we flag it: hidden rot found during demo, painting or staining beyond a basic finish coat, and any structural or permit work. You’ll see those listed separately so the number you see is the number you pay on the scope we agreed to.
See the difference
Before
After
Before
After
Before
AfterWhat Florence-Graham Homes Specifically Do to This Job
Florence-Graham is unincorporated LA County, which means building permits go through LA County Public Works rather than the City of LA. That single fact reshapes how door work gets permitted here, and it trips up contractors used to city processes. Most of the housing stock is 1920s to 1950s single-story stucco and wood-frame bungalows on small 5,000 to 6,000 sq ft lots with tight 3-foot side setbacks. Those old walls are rarely square, so a “stock” door often needs real shimming and frame work to sit right. The bigger story is what’s out back: many of these lots have a detached garage, and because garage conversions to habitable space are the most common permit pulled in 90001, an exterior service door on that structure is often the first step in a larger conversion. Homeowners here tend to pay cash and want the job finished in one solid visit, not three return trips. Warm, dry summers and mild winters mean our doors face UV and heat cycling rather than frost, so we spec finishes and weatherstripping that hold up to sun more than cold. We cover the whole Florence-Graham area this way, and when a door install is tied to a bigger project, our Windows & Doors team handles the wider envelope.
Serving Florence-Graham, CA – Our Local Coverage Area
We serve Florence-Graham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Florence-Graham

A single door install takes one visit, usually 4 to 6 hours, plus 3 to 10 business days of lead time for a stock door or 3 to 6 weeks for a custom one. Multiple doors on the same house usually add a day. Call (833) 842-7204 for a timeline on your specific openings.
A straight like-for-like replacement usually doesn’t require a permit, but widening an opening, cutting new structural framing, or adding an egress door to a converted garage does. Because permits here go through LA County Public Works, not the City of LA, the review path is different from most of Los Angeles. We’ll tell you in writing what your job needs before we start, and call (833) 842-7204 to talk through your scope.
Yes, most door installs are a straight swap within the existing opening and don’t touch plumbing or structure. Only a widened or relocated opening pulls in framing and finish work. When the door work is part of a bigger renovation, homeowners often pair this with Cabinets & Countertops in Florence-Graham or a Garage Conversion ADU in Florence-Graham, and we plan the sequence so trades don’t collide.
Expect $400 to $1,200 for a standard exterior door, $1,200 to $2,500 for a heavy-duty entry with premium hardware, and $1,800 to $4,500+ for multiple doors in one visit. Custom sizes and glass push it higher. Call (833) 842-7204 for an exact quote, estimates are free.
Every door we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Call (833) 842-7204 to schedule your free on-site estimate.
Get a Free Door Installation Estimate in Florence-Graham
Call (833) 842-7204 and a live person answers, day or night. We’ll set a time to walk your doors, measure the openings, and hand you a written line-item estimate with the door, hardware, and labor broken out. No pressure, no vague number. Background-checked, uniformed technicians handle the work, and every install is backed by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co..












