







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Florence-Graham, CA: What the Job Really Involves
New cabinets and countertops in Florence-Graham typically run $14,000 – $45,000 for a full kitchen, or $4,000 – $13,000 for cabinet installation alone and $2,000 – $6,500 for countertops, and most jobs take two to four weeks from demo to final caulk. The work is a strict sequence: template the room, set the boxes, level and shim, then template and cut the countertop before it goes down. Call (833) 842-7204 for a free on-site estimate with a written, line-item quote.
How a cabinets and countertop job actually runs, stage by stage

Most contractors wave a hand at the schedule. Here’s the real one, so you know what to expect on day one versus day twelve.
Stage 1: Measure and layout (1 – 2 hours)
We measure the room, check wall plumb and floor level, and confirm the appliance positions. You decide the cabinet layout, door style, and whether the sink stays where it is. Old Florence-Graham kitchens are rarely square, so this visit catches the surprises before anything gets ordered.
Stage 2: Demo and prep (1 – 2 days)
Old cabinets and countertops come out, along with the backsplash if it’s tied to the counters. We cap the plumbing, make safe the electrical, and repair drywall or subfloor. If a wall is out of plumb by more than a half inch, we shim and scribe rather than hide it behind filler strips.
Stage 3: Cabinet set (2 – 4 days)
Boxes get set, leveled, and screwed to studs. Uppers hang on ledger boards, base cabinets get shimmed to floor level, and the crown and light rail go on. You confirm hardware placement and drawer configuration at this point, before the countertop template.
Stage 4: Countertop template and fabrication (5 – 10 business days)
Stone and quartz get templated after the cabinets are set, not before, because the template follows the actual installed boxes. Fabrication runs a week to ten days. Laminate and butcher block can be cut and set in a day or two.
Stage 5: Install, plumbing, and final walk (1 – 2 days)
The countertop goes down, the sink and faucet get connected, and the dishwasher and disposal hook back up. We caulk, clean, and walk the job with you. Backsplash is a separate job with its own page, so we schedule it separately.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Cabinet and countertop choices drive most of the price difference on a Florence-Graham job. Here’s the honest trade-off on each.
- Stock cabinets (RTA or box store): Lowest cost, fastest delivery, limited sizes and finishes. Fits tight budgets and small kitchens but shows gaps at odd wall lengths.
- Semi-custom cabinets: The sweet spot for most Florence-Graham homes. Standard sizes with finish, door, and drawer options, delivery in 4 – 8 weeks. KraftMaid sits in this tier and holds up well in a working kitchen.
- Full custom: Built to the inch, any finish, any configuration. Highest cost and longest lead time, worth it only when the room has unusual geometry.
- Quartz countertops: Non-porous, doesn’t need sealing, holds up to heat and daily cleanup. The most common pick for a family kitchen.
- Granite: Natural variation, needs sealing every year or two, but durable and often priced close to quartz.
- Laminate: Cheapest option, easy to clean, but seams show and edges chip. A reasonable stopgap when the budget is stretched.
- Butcher block: Warm, repairable, needs oiling. Works well on an island but not around a wet sink.
What Cabinets & Countertops costs in Florence-Graham, CA

A full cabinets and countertop job in Florence-Graham lands between $14,000 and $45,000. A smaller or partial job, like replacing just the uppers or just the countertops, runs $4,000 – $13,000 for cabinets and $2,000 – $6,500 for countertops.
| Line item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Full cabinets + countertops | $14,000 – $45,000 |
What pushes a job to the low end: stock cabinets, laminate or butcher block, the sink staying put, and no wall moves. What pushes it to the high end: semi-custom or full custom boxes, quartz or natural stone, moving the sink or range to a new wall, removing a partial wall, or discovering old galvanized plumbing or knob-and-tube wiring behind the cabinets. A written estimate covers demo, cabinets, countertop fabrication and install, sink and faucet reconnect, and haul-away. It usually doesn’t cover new appliances, backsplash, flooring, or structural changes, which get quoted separately.
See the difference
Before
After
Before
After
Before
AfterWhat Florence-Graham homes specifically do to this job
Most of the housing stock here is 1920s to 1950s single-story stucco bungalows on 5,000 – 6,000 square foot lots, and that changes the job in ways a newer suburb never would. Walls are rarely plumb, floors slope, and the original kitchen was built around a 30-inch range and a single sink. Opening the cabinets often reveals galvanized supply lines, old cloth wiring, or a wall that was never meant to carry uppers. Because Florence-Graham is unincorporated LA County, permits go through LA County Public Works rather than the City of Los Angeles, which trips up contractors used to city processes. Cosmetic swaps like cabinet and countertop replacement generally don’t require a permit, but anything that moves plumbing, gas, or a wall does, and we pull those. If the scope grows to a full gut, this becomes part of a full Kitchen Remodeling in Florence-Graham and we scope it that way from day one.
Serving Florence-Graham, CA – Our Local Coverage Area
We serve Florence-Graham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Cabinets & Countertops in Florence-Graham

Most jobs run two to four weeks, with the bulk of the wait being countertop fabrication. Cabinet set takes 2 – 4 days, and the template to install gap is usually 5 – 10 business days for quartz or stone. Laminate cuts that wait to a day or two.
Not for a straight swap of cabinets and countertops in the same footprint. You do need one if you’re moving plumbing, gas, or electrical, or taking out a wall, and in Florence-Graham that means LA County Public Works, not the City of LA. We pull those permits and pass the inspections.
Yes, and most Florence-Graham jobs do. Keeping the sink, range, and dishwasher in place avoids plumbing and electrical work and keeps the job in the $14,000 – $45,000 range. Moving the sink across the room adds cost and a permit.
Full jobs run $14,000 – $45,000, cabinet-only $4,000 – $13,000, and countertop-only $2,000 – $6,500. The biggest lever is material grade and whether anything moves. Call (833) 842-7204 for an exact quote, and estimates are free.
Every job is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship, and we stand behind the material brands we install alongside it.
Get a free cabinets and countertops estimate in Florence-Graham
We’ll come out, measure the room, check the walls and floor, and hand you a written, line-item estimate with no surprises. If an old kitchen reveals something behind the boxes, we flag it before it becomes a change order. Call Florence-Graham at (833) 842-7204, or ask about pairing this with a Garage Conversion ADU in Florence-Graham or a New Detached ADU in Florence-Graham while we’re on site.
Written by the team at Groundwork Construction Co.












