







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Florence-Graham, CA: What It Costs and How Fast It Goes Up
A chain link fence on a standard Florence-Graham lot runs $3,500 – $9,000 installed, and most residential jobs are finished in two to four working days. The number moves with footage, height, gate count, and how much old fencing or brush has to come out first. If you’ve got a 1920s bungalow with a 3-foot side yard and a detached garage at the back, that layout drives the price more than the wire does. Call (833) 842-7204 for a free on-site estimate.
How a Chain Link Fence Goes Up in Florence-Graham, Step by Step

Every chain link job here follows the same sequence. It’s simple work compared to a lot of what goes on in Florence-Graham, but the details are where fences fail early, so we don’t skip steps to save a day.
Day 1: walk and stake. We walk the property line with you, confirm exactly where the fence sits relative to the setback, and mark post locations. This is where you decide the real questions: 4-foot, 5-foot, or 6-foot height, gate width and swing, and whether the fence ties into an existing structure at either end. On narrow Florence-Graham lots, that side-yard decision matters because you’re working with roughly 3 feet between the house and the property line.
Day 1: demo and prep. Old fencing, concrete footings, shrubs, or a leaning section come out. We haul it away. Brush clearing along the line usually takes a few hours on a typical lot, more if a mature tree or root system is in the way.
Day 1 – 2: posts and concrete. Line posts go in at 8- to 10-foot spacing, terminal posts at corners and gates, all set in concrete. The concrete needs to cure before the fabric goes tight. That cure time is the one thing we won’t rush. It’s also why a two-day job sometimes runs to three.
Day 2 – 3: rails, fabric, and tension. Top rail, tension wire, chain link fabric, and the tension bars get pulled and set. Gates hang last. You confirm the swing direction and latch height before we call it done.
Day 3 – 4: final walk and cleanup. We walk the line with you, check gate function and tension, clean the site, and hand over the written workmanship terms. Anything that isn’t right gets fixed before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Height: 4-foot is common for property lines between neighbors, 5-foot is a good middle, and 6-foot gives more privacy and security. Taller runs cost more in posts and fabric.
- Gauge of wire: 11.5-gauge is lighter and cheaper, 9-gauge is heavier and holds up longer against dogs, kids, and wind. On Florence-Graham lots with a working garage or shop at the back, we usually lean 9-gauge.
- Coating: Galvanized steel is the budget choice and rusts over time. Vinyl-coated chain link in black or green costs more up front and lasts significantly longer in our sun and dust.
- Posts: Standard 1-5/8″ line posts versus heavier Schedule 40 pipe. The heavier pipe is worth it on gates and on corners where a truck or trailer backs in.
- Gates: Walk gates for people, drive gates for vehicles, and double swing gates for wide openings at the side yard or garage. Each gate adds cost but is the most-used part of the fence, so don’t cheap out here.
- Top rail and tension wire: A tension wire at the bottom keeps fabric tight and stops animals from pushing under. Small line item, real difference.
What a Chain Link Fence Costs in Florence-Graham, CA

The typical range for a residential chain link fence in Florence-Graham is $3,500 – $9,000 installed. That range is wide on purpose because the variables below move it a lot. Here’s what pushes a job toward the low or high end:
| Factor | Low End | High End |
|---|---|---|
| Linear feet | Short runs, straight lines | Longer perimeter, lots of corners |
| Height | 4-foot | 6-foot |
| Wire gauge | 11.5-gauge | 9-gauge |
| Coating | Galvanized | Vinyl-coated |
| Gates | One walk gate | Multiple gates or a drive gate |
| Site prep | Clear line, easy digging | Old fencing, concrete, tree roots |
What’s included in a written estimate: all materials, concrete, post setting, gate hardware, hauling away old fencing and debris, and the written workmanship terms. What’s not: large tree removal, grading, or any concrete work beyond the post footings. If we find a buried footing or utility line during the walk, that gets priced before anyone starts digging, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Florence-Graham Homes Specifically Do to This Job
Florence-Graham is unincorporated LA County, which means permits go through LA County, not the City of LA. That’s a small detail with real consequences: contractors used to city processes sometimes pull the wrong permit or skip one they assume is handled. Most residential chain link fence work on a standard lot doesn’t need a permit, but anything over 6 feet, or any fence near a property-line dispute, does. We check that before we promise a start date.
The housing stock here is predominantly 1920s – 1950s single-story stucco and wood-frame bungalows on small 5,000 – 6,000 square foot lots, many with detached garages at the back. Those narrow side yards and tight property lines mean the fence layout has to be planned carefully, and we often find old chain link footings, buried concrete, or a fence line that’s drifted a foot or two off the actual boundary. The Santa Ana winds that hit in fall also take a toll: a light 11.5-gauge chain link fence on shallow posts will lean and buckle over time. Heavier pipe and deeper footings hold up better.
Serving Florence-Graham, CA – Our Local Coverage Area
We serve Florence-Graham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chain Link Fence in Florence-Graham

Most residential chain link fences in Florence-Graham take two to four working days. Short runs go in two days; larger perimeters with multiple gates and demo work run three to four. Concrete cure time is the main variable, since we don’t stretch fabric before the posts are set.
Not usually for a standard 4- to 6-foot residential fence on a normal lot, but taller fences or those near a property-line question do require a permit through LA County. We review the specifics on the free on-site visit and let you know before the job starts.
Yes, in nearly every case. Post holes are set at 8- to 10-foot intervals, so disruption to landscaping is limited. The one thing we won’t do is dig without checking for buried utility lines, which we confirm before day one.
Most residential jobs land between $3,500 and $9,000 installed. Footage, height, wire gauge, coating, and gate count are the biggest variables. Call (833) 842-7204 for an exact quote – estimates are free.
Every chain link fence we install is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right. That’s the same written commitment we put behind every other job we do, and it applies here.
Get a Free Chain Link Fence Estimate in Florence-Graham
Call (833) 842-7204 and a live person picks up, day or night, to schedule your free on-site estimate for a chain link fence in Florence-Graham. We’ll walk the property, check the property line, and hand you a written price with the number you see being the number you pay. No surprise line items. If it’s part of a larger project, see our Fence Installation in Florence-Graham page or our full Fence Installation service. We also handle ADU Site Prep & Utilities in Florence-Graham and Door Installation in Florence-Graham if those come up along the way. You can find our broader coverage on the Florence-Graham service-area page.
Written by the team at Groundwork Construction Co.












