A Groundwork company - serving Inglewood, CA
A living room with a wall of new windows and a sliding glass door

Windows & Doors Maintenance Schedule: What to Do and When

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Inglewood

Last updated November 18, 2026

New double-hung windows in a dining room
A new front entry door with glass sidelights
A new paver pool deck
An open kitchen and dining area after a remodel
A freestanding soaking tub in a remodeled primary bathroom
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new black aluminum pool fence with a gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Windows & Doors Maintenance Schedule: What to Do and When

A $4 tube of silicone caulk, applied every two years, can prevent the $8,000 water intrusion repair that starts at a window corner and spreads into drywall and framing. That’s the whole case for a maintenance schedule in one sentence. Most Inglewood homeowners never think about their windows and doors until something fails, and by then the cheap fix has become an expensive one. This guide lays out a season-by-season routine tuned to Southern California’s dry summers and wet winters, the specific products and intervals for lubricating different hardware, and the inspection habits that protect both your home and any installation warranty you’re counting on.

Call (833) 842-7204

Quick Answer

Windows and doors should get a light inspection every season and a deeper service once a year, timed for early fall before the rainy season. The core tasks are cleaning tracks and weep holes, lubricating moving hardware with the right product for each mechanism, checking caulk and weatherstripping for gaps, and adjusting or replacing door sweeps and thresholds before air and water find their way in. A homeowner who does these four things consistently can add years to the serviceable life of their windows and doors and avoid the full replacement costs that follow deferred maintenance.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Table of Contents

The Southern California Seasonal Calendar: Why Generic Four-Season Advice Fails Here

Most maintenance guides are written for the Northeast or Midwest, where the enemy is freeze-thaw cycling and heavy snow load. Inglewood doesn’t have that problem. What we have is a long dry season that bakes caulk and shrinks weatherstripping, followed by a rainy season that tests every gap at once. The failure pattern is different, and so is the calendar.

From roughly May through October, Inglewood sits in the dry cycle. UV exposure degrades sealant, wood dries and shrinks, and vinyl expands in the heat. Then the first real rains of November and December arrive and find every hairline crack that opened over the summer. In our experience, the majority of water intrusion calls we see in Inglewood come in the first two weeks of the rainy season, and almost all of them trace back to something that could have been caught in September.

That’s why the single most important date on your maintenance calendar is early October. Everything you do in that window is about sealing the building before the wet season.

Your Inglewood Seasonal Task List

  1. March (post-rain check): Walk the interior of every window during or right after a rain. Look for dampness at corners, fogging between panes, and water staining on the sill or drywall below. Catch active leaks while they’re still cheap.
  2. May (pre-summer prep): Clean tracks and weep holes of winter debris and pollen. Inspect exterior caulk for cracking that opened over the wet months. Lubricate hardware before the dry heat makes everything stiff.
  3. July (mid-summer check): Re-check caulk on south- and west-facing windows, which take the most UV. This is when sealant shrinks and pulls away. Reapply as needed.
  4. October (the big one): Full inspection and reseal before the rains. Replace worn sweeps and weatherstripping. Clear every weep hole. Photograph everything for your records.
  5. December (mid-rain check): A quick pass to confirm no new leaks appeared after the first storms. Address anything that shows up immediately rather than waiting for spring.

Five touchpoints, most of them under an hour. That’s the entire schedule. If you own a home in Inglewood and you’ve never done this, start with the October pass and work backward. For broader upkeep on the exterior envelope, our guide to Groundwork Construction Co. of Inglewood home covers how windows and doors fit into the rest of your home’s maintenance picture.

The Annual Inspection Walkthrough: A Room-by-Room Routine

An inspection only works if it’s systematic. Walking around and “looking at things” misses half of what you need to catch. Use the same sequence every year so nothing gets skipped, and do it in daylight when you can actually see gaps and staining.

Start outside and work inward. Exterior problems are easier to spot and cheaper to fix before they migrate.

  1. Exterior perimeter, window by window: Run a finger along the caulk joint where the frame meets the siding or stucco. Any crack, pull-away, or crumbling means it’s time to reseal. Check the sill for standing water or debris buildup.
  2. Glass and glazing: Look for cracks, chips, and especially fogging between panes on double-glazed units. Fogging means the seal has failed and the unit needs replacement, not just cleaning.
  3. Frames and sashes: On wood frames, probe soft spots with a screwdriver tip. Soft wood is rot, and rot spreads. On vinyl, check for warping or discoloration that signals UV damage.
  4. Operable hardware: Open and close every window. A casement that drags, a slider that sticks, or a lock that won’t seat is telling you something. Note which ones need attention.
  5. Interior finish: Look at the drywall and trim around each window and door for bubbling paint, staining, or soft spots. These are signs water got behind the wall.
  6. Doors, interior and exterior: Check that each door latches cleanly, doesn’t rub the frame, and swings without binding. Look at the threshold and sweep for gaps and wear.

Note the condition of every unit as you go. A simple spreadsheet with a row per window and column per check makes year-over-year comparison easy, and it doubles as warranty documentation. That matters more than most people realize, and we’ll come back to it.

Lubrication by Hardware Type: Casement Cranks, Sliding Tracks, Deadbolts, and Hinges

Here’s a mistake we see constantly: someone grabs a can of WD-40 and sprays everything that moves. That’s the wrong tool for most of the job. Different hardware needs different products, and using the wrong one can attract dust, gum up mechanisms, or strip away the lubricant that was actually protecting the part.

Lubricate once a year, ideally in the October pass, and again lightly in spring if anything feels stiff. Here’s what to use where.

Casement and Awning Window Cranks

The crank mechanism and the operator arm are the wear points. Use a silicone spray or a light white lithium grease on the operator arm and the track it rides in. Avoid heavy grease here because it collects grit and turns into grinding paste. Wipe off the old lubricant first with a clean rag, then apply a thin coat. If the crank feels gritty or the window won’t hold position, the operator may be failing and needs replacement, which is a straightforward part swap on most brands.

Sliding Window and Patio Door Tracks

Clean the track thoroughly first. Vacuum out debris, then wipe with a damp cloth, then dry it completely. Only then apply lubricant. Use silicone spray on the track and rollers. Never use oil or grease on a sliding track, because it holds dust and the track gets gritty within weeks. On older aluminum sliders, check the rollers themselves for flat spots; a roller that’s worn flat will make the door drag no matter how much you lubricate.

Deadbolts and Locksets

Use a graphite or dry PTFE lubricant in the keyway and on the bolt mechanism. A dry lubricant won’t attract dust the way oil does. Lock manufacturers like the ones on hardware from CertainTeed and Owens Corning-spec doors recommend dry lubricants for exactly this reason. Insert a small amount, work the key several times, and wipe off any excess. Don’t flood the cylinder.

Hinges

Standard door hinges take a couple of drops of light machine oil on each hinge pin. Wipe the excess. On exterior doors, take a moment to check the hinge screws for tightness while you’re there, since the top hinge on a heavy door loosens over time and pulls the door out of square. If a hinge is squeaking and won’t take lubrication, replacing the hinge is cheap and quick.

Locking Mechanisms and Weatherstripping Contact Points

Apply a thin coat of silicone or paraffin wax to the strike plate and the points where the door meets the weatherstripping. This keeps the door latching smoothly and reduces friction wear on the seal itself.

Weep Holes on Vinyl Windows: The Step Almost No Guide Covers

Weep holes are small drainage slots, typically at the bottom of the window frame, that let water that gets past the exterior seal drain out instead of pooling inside the frame. They’re the reason a window doesn’t rot from the inside out when a little water slips past the caulk. And they are the single most neglected maintenance item on most Inglewood homes.

When weep holes clog, water sits inside the frame channel. On vinyl windows, that trapped water works its way into the wall cavity, and the visible result is staining, soft drywall, and eventually rot in the framing around the opening. A problem that would have been a five-minute cleaning becomes a wall repair. This is exactly the kind of failure point we try to catch before it’s necessary, and it’s one reason so many “replacement needed” calls are really maintenance calls.

How to Inspect and Clear Weep Holes

  1. Locate them: Look along the bottom exterior edge of each window frame. On most vinyl and aluminum windows you’ll find small slots or a series of narrow openings. Sliding windows often have them at the lower track; casements typically have one or two at the sill of the frame.
  2. Look for blockage: Debris, dirt, pollen, spider webs, and sometimes paint from a previous exterior paint job fill these slots. If you can’t see daylight through the slot, it’s blocked.
  3. Clear gently: Use a soft brush, a toothpick, or a piece of soft wire. Work from the outside. Never force a rigid tool through at an angle, since you can damage the frame or push debris further in.
  4. Flush with water: A gentle stream from a hose confirms the slot drains freely. If water backs up in the channel, there’s still blockage.
  5. Check the weep-hole covers: Some windows have small plastic covers designed to let water out while keeping wind and pests from driving in. If the cover is missing or broken, replace it. This is a small part that makes a real difference.

Do this in March after the rains and again in October before the next wet season. It’s the cheapest maintenance on this entire list, and it’s the one most likely to prevent a five-figure repair. If your weeps are permanently clogged or you’re seeing water inside the frame, that’s a sign the window is failing beyond maintenance, and it may be time to talk about replacement with a window that’s built to last and backed in writing.

Door Thresholds and Sweeps: When Wear Signals It’s Time to Replace

A door threshold and sweep have one job: keep air, water, and pests from coming under the door. When they fail, you’ll feel it before you see it, and the problem is always worse in the wet season. Inglewood’s rainy months turn a small gap into a wet interior floor and eventually a rotting threshold board and subfloor.

Check your thresholds and sweeps twice a year, and after any stretch of heavy rain. Here’s the cadence and what to look for.

What Wear Signals Are Worth Acting On

  • A visible gap under the door: Shine a flashlight under the closed door from inside. If you see light all along the sweep, it’s not sealing. A partial gap at one end often means the door is out of square rather than the sweep being worn, which is a different fix.
  • A torn or compressed sweep: The flexible fin or brush on the bottom of the door flattens over time. If you can see daylight through the sweep itself, or it drags on the threshold, replace it.
  • A threshold that rocks or is loose: A threshold that moves means the fasteners are loose or the substrate beneath is soft. That’s often early rot, and it’s worth inspecting the door sill carefully.
  • Water pooling on the interior floor after rain: This means water is getting under the door. Check the sweep and the threshold together, and look at whether the threshold has a proper water-shedding slope and a sill pan beneath it.
  • A draft in winter or heat gain in summer: Air infiltration is a comfort and energy problem, but it’s also the first sign the seal has failed. Address it before it becomes a water problem.

Preventive Steps

Wipe the threshold clean each season and apply a light coat of a rubber or silicone protectant to the sweep fin to slow UV degradation and keep the seal flexible. Check that threshold screws are snug. If the door has an adjustable threshold, verify the seal height is correct so the sweep compresses firmly without dragging. Replace worn sweeps in October before the rains.

A worn threshold on an exterior door is a small repair with outsized consequences if ignored. Keep ahead of it, and if the door itself is warping or the sill shows rot, that’s a replacement conversation rather than a repair.

Caulk and Weatherstripping: The Water Intrusion Front Line

The opening hook of this guide said a $4 tube of silicone caulk can prevent an $8,000 water intrusion repair. That’s not a marketing number. That’s our experience with how these failures start and where they end. Caulk and weatherstripping are the first line of defense, and once water gets behind them, every repair downstream is more expensive.

Caulk on Inglewood homes typically lasts two to four years depending on sun exposure, material, and how well it was applied. South- and west-facing windows go first because they take the most UV. Interior caulk lasts much longer, though it does shrink and crack around trim over time. Weatherstripping wears on the contact side and compresses until it stops sealing.

The Inspection Routine

  1. Check every exterior caulk joint: Run a finger along the joint between the frame and siding or stucco. If you feel a crack, pull-away, or crumbling, it needs attention.
  2. Test weatherstripping contact: Close the window or door and look for gaps around the edge. A dollar bill slid around the closed door should meet resistance; if it slides freely, the seal has failed.
  3. Remove failed caulk completely: Don’t caulk over old caulk. Cut it out or scrape it back to a clean surface. New caulk over old will fail faster than the original.
  4. Choose the right product: Use an exterior-grade siliconized acrylic or 100% silicone caulk rated for exterior use. On stucco and masonry, a paintable siliconized acrylic is a good fit if you’re matching paint. On vinyl frames, stick with a silicone rated for vinyl.
  5. Apply and smooth: Apply a consistent bead and smooth it with a damp finger or caulk tool so it’s sitting tight on both surfaces. Tooling the bead matters more than most people realize; it’s what pushes caulk into the joint.
  6. Replace weatherstripping where it’s worn: Measure the old strip, buy a matching profile, clean the surface, and press or fasten the new strip into place. Replacement strips are inexpensive and available at any hardware store.

Do the full exterior caulk pass in early October, and touch up anything that opens through the summer. If your home has been through more than one rainy season without a caulk check, start there. And if you’re facing more than sealant can fix, a fresh set of windows from a partner brand like Andersen or Pella can put the whole envelope back on solid footing.

What to Log and Photograph Every Year to Protect Your Warranty

Window and door warranties usually have a maintenance condition. Fail to show you’ve done reasonable upkeep, and a warranty claim on a leak or hardware failure can get denied. The good news is that a solid record takes about 15 minutes a year to put together.

Photograph the same things every year, from the same angles, and store them in a dated folder. Here’s the checklist.

What to Photograph Annually

  • Every window’s exterior perimeter: A shot of the full frame, then a close-up of the caulk line at the sill and sides. This proves the seal was in good condition.
  • Weep holes on each window: A close-up showing they’re open and clear.
  • Door thresholds and sweeps: Shots showing the sweep is intact and the threshold is sound. Include the interior view under the closed door.
  • Any active defect: If you see a crack, stain, fogging, or hardware problem, photograph it and date it. This starts a paper trail that shows when you noticed the issue and how quickly you acted.
  • Glass: Fogging between panes often develops slowly. A photo each year lets you compare and prove the seal failed after installation.

What to Log

  • Date of each inspection.
  • Products used (brand, type) for caulk, lubricants, and replacement parts.
  • Any hardware or sealant replacements, with part numbers if you have them.
  • Any professional service performed, with the date and what was done.

Store the log with your other home records, and keep the photos in a cloud folder. When you sell an Inglewood home, this record is also a selling point: it shows the buyer the windows and doors have been maintained rather than ignored. It’s a small habit that pays for itself the first time you need it.

When Maintenance Stops Being Enough

Maintenance extends life, but it doesn’t extend it forever. Part of knowing what to do and when is knowing when to stop maintaining and start pricing. Here are the signals that maintenance has run its course.

  • Fogging between panes on double-glazed units: This means the insulated glass seal has failed, and no amount of maintenance restores it. The unit needs replacement.
  • Rot in the frame or sill: Once wood frames soften, the structural integrity is compromised. Caulk will not fix it.
  • Multiple windows failing simultaneously: If five units are fogged or leaking at the same time, the units are at the end of their service life. That’s a whole-home replacement rather than a one-by-one repair.
  • Drafts and energy spikes you can’t trace to a single seal: Aging windows with failing frames leak around the entire perimeter.
  • Hardware failures that repeat: When operables fail every few years, the unit’s mechanism is worn out, not just the part.

A home in Inglewood that’s still running original 1970s or 1980s aluminum or single-pane windows is a strong candidate for upgrade. Replacing them pays back in comfort, quiet, energy use, and appearance. When that time comes, it’s worth talking to someone who can show you the actual brands in the running, like Andersen, Pella, Marvin, and other name-brand options that stand behind their product.

Common Mistakes to Avoid

  • Caulking over old, failing caulk. It looks like it works for one season, then peels off and takes some of the old material with it. Strip it clean and start fresh.
  • Using the wrong lubricant on sliding tracks. Oil or grease on a sliding window track turns into a dust magnet. Use silicone spray, and clean before you lubricate.
  • Ignoring weep holes until water shows inside. Weep holes are the most overlooked maintenance item in Inglewood homes, and a clogged one is the most common starting point for frame rot and interior water damage. Clear them twice a year.
  • Skipping the October reseal for the “we’ll do it next spring” plan. In our experience, water gets in during the rainy season, and by spring you’re in a repair instead of a maintenance task.
  • Assuming the new windows are maintenance-free. Even the best windows need caulk upkeep, weep-hole clearing, and hardware lubrication. The maintenance routine just changes, it doesn’t end.
  • Not documenting maintenance. No photos and no log means no warranty protection when a claim is filed. Fifteen minutes a year fixes that.
  • Replacing windows before addressing leaks you already have. If water is getting into a wall cavity, installing new windows on a damaged opening doesn’t solve the problem. The wall needs to be sound first.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

When to Call a Professional

Some tasks are homeowner-level work. Others aren’t. Call a professional when you find rot in a window frame or sill, water staining on interior drywall under a window, fogging between panes across multiple units, a door that won’t close or latch after adjustment, or a window that’s hard to open or keeps falling out of position. On the exterior side, contact a professional when you’re facing a wall cavity repair, a threshold or sill replacement involving subfloor, or a full window or door replacement.

Groundwork Construction Co. of Inglewood offers free estimates in Inglewood – call (833) 842-7204. We bring experienced technicians, no-hassle upfront pricing, and a 730-Day Done Right Promise that backs the work in writing. If what you’re facing is a full window or door replacement rather than a maintenance item, we can help you find the right fit and quote it clearly, with budget options like 0% financing for 18 months. For related exterior projects, our Driveway & Pavers in Inglewood and Fence Installation in Inglewood services are a natural next step. And when your project grows into something larger, Home Additions & ADU in Inglewood rounds out the picture.

Frequently Asked Questions

A new casement window over a kitchen sink

The Bottom Line

Window and door maintenance is not about appearances; it’s about catching the three or four failure points that turn a $4 caulk repair into a five-figure water intrusion problem. The Inglewood-friendly schedule is simple: inspect every season, do the full pass in early October before the rains, clear weep holes twice a year, lubricate the right hardware with the right product, check thresholds and sweeps for wear, and photograph everything you do. Do that, and you’ll get years more life out of what you already have. When maintenance stops being enough, we’re here to help you figure out the next step and quote it clearly. Call Groundwork Construction Co. of Inglewood at (833) 842-7204 for a free estimate. Our team will walk the windows and doors with you, tell you what’s maintenance and what’s replacement, and put the number in writing. No-hassle upfront pricing, so there are no surprises once work starts.

Written by the team at Groundwork Construction Co. of Inglewood.

Getting started with Groundwork in Inglewood

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Inglewood team

A local vetted partner works across Inglewood and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Inglewood? Licensed & insured · free written estimates
Call (833) 842-7204
Local Service Coverage

Request a Free Estimate in Inglewood

Tell us what you need - Groundwork Construction Co. of Inglewood responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch