







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Maywood, CA: What It Costs and How Long It Takes
A chain link fence in Maywood, CA typically runs $3,500 to $9,000 installed, and most residential jobs are finished in two to four days once the layout is marked and the permit (if one is needed) clears. That range covers a standard 4-foot or 6-foot galvanized run with posts set in concrete; taller security heights, gates, and vinyl-coated finishes push toward the top. For an exact number on your lot, call (833) 842-7204 and we’ll walk it with you.
How Our Chain Link Fence Installation Works, Stage by Stage

Chain link gets a bad reputation as the simple fence, and on a clear, flat lot it can be. In Maywood it rarely is. Here’s the actual sequence, so you know what’s happening on your property and when you need to make a call.
Stage 1: Site walk and layout (day 1, about an hour)
We mark the property line with you standing right there, confirm setback clearance from the structure, and check what’s buried. That last part matters here. Older Maywood lots often hide irrigation lines, gas stub-outs, and the occasional leftover footing from a fence that came down decades ago. You decide the fence line, gate placement, and height at this stage, because moving a post line later means re-digging.
Stage 2: Demo and post holes (day 1 into day 2)
Old fencing comes out first, usually half a day, and we sort metal for recycling. Post holes get dug on 8-foot centers, deeper on corners and gates where the load concentrates. Because Maywood lots are so tight, we often run a mini-excavator or walk-behind auger and stage spoils on a tarp rather than a dumpster in the driveway. Expect noise and access coordination, especially if your neighbor’s wall is close.
Stage 3: Posts set in concrete (day 2)
Posts go in with concrete footings and get a day to cure before any tension goes on the fabric. You don’t have to do anything here except keep vehicles off the line. This cure window is the main reason a chain link job takes days rather than hours, and skipping it is how fences end up leaning after the first windy season.
Stage 4: Rails, fabric, and tension (day 3)
Top rail, bottom tension wire, and the chain link mesh itself. Gates get their frames and hardware. Tensioning is the part that decides how the fence looks in a year, so we take the time to pull it even rather than fast. You confirm gate swing direction and latch height here.
Stage 5: Walkthrough and inspection (day 3 or 4)
We walk the finished line with you, check every post for plumb, test the gates, and hand over the paperwork. If the job required a permit through the local building department, the inspection closes it out. You leave with a fence that’s square, tensioned, and backed in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Fence Options You’ll Choose Between
The material choices here are fewer than with wood or vinyl, but each one changes the price and the lifespan. Here’s the honest version of each.
- Galvanized steel (the standard): The most common and least expensive option. Holds up well in dry heat, though the coating dulls over the years. Fits most residential budgets.
- Vinyl-coated chain link: Color holds better against UV and looks softer against stucco. Runs meaningfully higher than bare galvanized. Worth it for street-facing runs.
- Height: 4-foot vs 6-foot vs 8-foot: Height is the biggest single cost lever. A 6-foot fence adds material and requires taller posts and more concrete. Only go tall if you actually need the privacy or security.
- Gauge and post weight: Thicker wire and heavier posts cost more up front and hold tension longer. Cheaper, thinner chain link sags faster in heat.
- Gates and hardware: A walk gate is one line item; a double drive gate is a bigger one, with heavier frames and hinges to carry the span.
- Top rail vs tension wire only: A top rail keeps the fabric tight and looks finished. Bottom tension wire is optional but recommended for longevity.
What a Chain Link Fence Costs in Maywood, CA

Plan on $3,500 to $9,000 for a typical residential chain link fence in Maywood. The low end fits a modest 4-foot run on a small lot; the high end covers a full 6-foot perimeter with gates and a vinyl-coated finish. Five things push the number:
- Linear footage and lot size. More feet, more material and holes.
- Fence height. Jumping from 4 to 6 feet is the biggest single increase.
- Gates. Each gate adds frame, hardware, and a wider, deeper footing.
- Existing fence removal. Tearing out old metal or posts runs extra.
- Permit scope. Some taller or front-yard runs require a permit and inspection, which adds to the total.
A written estimate from us is line-item: footage, height, gauge, gates, removal, and permit handling, so you see exactly where the money goes. Upfront pricing with no surprises, and the number you see is the number you pay. 0% financing is available for 18 months, and projects over $10,000 take $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Maywood Homes Specifically Do to a Chain Link Job
Maywood is one of the most densely built-out cities in Los Angeles County, with lots often no larger than 5,000 square feet and post-war stucco-over-wood-frame homes packed wall to wall. That density shapes this job more than anything else. Because the homes sit so close together, we often have to stage materials on the street and coordinate with neighbors so access doesn’t block a shared driveway. The semi-arid LA Basin heat and intense UV also take a toll: sunny, dry summers break down coatings and posts over time, so we spec heavier gauge and a proper concrete footing to hold the line through the long hot season. Most of the homes here are 1940s and 1950s single-story builds, and we regularly find old stucco walls and raised foundations right along the fence line, which changes how holes get dug near the house. When a job touches a garage conversion or a full Fence Installation in Maywood project, we coordinate the whole scope as part of that work.
Serving Maywood, CA – Our Local Coverage Area
We serve Maywood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Maywood

Most residential chain link fence jobs in Maywood take two to four days from layout to walkthrough. The cure time on the concrete footings is the biggest factor; a small run on a flat lot can close out faster. We give you a firm schedule in the estimate, so you can plan around it.
It depends on the height and location of the fence. Front-yard runs and taller fences are more likely to need a permit and inspection through the local building department. We check the requirements for your specific lot and handle the permit paperwork for you as part of the job.
Yes, in most cases. Chain link is a post-and-fabric system set in concrete, so it doesn’t require moving plumbing, wiring, or framing. The only complication is a buried line in the post path, which we check for during layout. If we find one, we adjust the hole location rather than cut into it.
No. With our upfront pricing, the number on your written estimate is the number you pay. If something genuinely unforeseen turns up (an unmarked utility line, an old footing in the path), we document it and talk to you before any change, never after. Every job is covered by the 730-Day Done Right Promise.
Every chain link fence we install is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on posts, concrete, tensioning, and gates. The galvanized or vinyl coating’s material performance is supported by the manufacturer’s own warranty.
Get a Free Chain Link Fence Estimate in Maywood
Call (833) 842-7204 to schedule a free on-site estimate for your chain link fence in Maywood. A live person answers, day or night, and on the call we’ll ask about footage, height, gate needs, and any old fence that needs removal. We walk the lot with you, hand you a line-item written quote, and explain what’s included. Our technicians have up to 12 years of experience, and every job is backed in writing.
Written by the team at Groundwork Construction Co.












