







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Lynwood, CA: What It Costs and How It Goes
Concrete driveways and concrete work in Lynwood, CA typically run $4,500 – $12,000 for a full driveway install, and most single-driveway pours are done in three to five working days, weather allowing. A replacement pour on an existing apron lands in the $5,000 – $14,000 range. Call (833) 842-7204 for a free on-site estimate, and we’ll walk the slope, the drainage, and the approach apron before we quote a number.
How a Concrete Driveway Goes In, Start to Finish

Concrete work on a tight Lynwood lot isn’t a one-pour job. Here’s the sequence we actually run, and where you make decisions.
Stage 1: Site visit and layout (day 1, about an hour)
We measure the drive, check the slope away from the garage, and look at where the existing apron meets the street. On Lynwood’s compact lots, the critical question is drainage: water has to run off the slab and away from the foundation, not pool against the stucco. You decide the driveway width (a standard single is 10 – 12 feet; wider if you park two cars) and whether you want any decorative finish.
Stage 2: Demo and haul-off (days 1 – 2)
Old concrete, root-damaged sections, and failed base get broken out and hauled away. We confirm no irrigation lines or buried conduit run under the pour before the breaker goes in. Expect the noise and a dumpster on the street for a day. If the existing slab is sound and only cracked at the surface, we’ll tell you – sometimes a replacement isn’t the right call.
Stage 3: Base prep and grading (day 2)
This is the stage most homeowners never see and the stage that determines whether the driveway cracks in three years or holds for thirty. We excavate to depth, compact the subgrade, and lay a compacted aggregate base with proper thickness under the slab. Poor base is the number one reason driveways fail in Lynwood’s clay-heavy soil. You approve the final grade before we form.
Stage 4: Forming, rebar, and inspection (day 3)
Forms go up, rebar or mesh gets set on chairs, and if the scope triggers a City of Lynwood permit, the inspector signs off on the pre-pour. This is your window to add a control joint layout or change the finish. Once the pour starts, changes are expensive.
Stage 5: Pour, finish, and cure (day 3, then 7 – 28 days of curing)
Concrete gets placed, screeded, floated, and finished – broom finish for traction is the standard, and we recommend it on any sloped drive. You can walk on it in about 24 hours, drive on it in 7 days, and it fully cures over 28. We’ll tell you exactly when to keep vehicles off.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Concrete Options You’ll Choose Between
- Standard broom-finish concrete – the workhorse. Grey, textured, slips less than smooth, and the least expensive per square foot. Best fit for most Lynwood driveways.
- Exposed aggregate – pebble surface that hides tire marks and stains better than plain concrete. Costs more and is harder to spot-repair if a section ever fails.
- Colored or integrally tinted concrete – a pigment mixed into the pour so the color goes all the way through, not just on top. Holds up far better than a surface stain in the Santa Ana sun.
- Bordered or banded pour – a contrasting edge strip for visual definition. Pure aesthetics; adds cost, adds nothing structural.
- Fiber-reinforced vs. rebar – fiber mesh helps control shrinkage cracks; rebar or a mesh grid carries load. For a driveway that takes a vehicle, we specify steel.
- Thickness – 4 inches is standard for a residential drive; 5 – 6 inches where a heavy truck or RV parks. Tell us what’s going to sit on it.
If part of the project also involves a patio or walkway, that’s handled as part of a full Driveway & Pavers in Lynwood scope. A related note: homeowners who add a rear unit or convert a garage often pair this with ADU Site Prep & Utilities in Lynwood, since the drive and the utility trench get coordinated.
What Concrete Driveways & Concrete Work Costs in Lynwood, CA

Plan on $4,500 – $12,000 for a new concrete driveway in Lynwood; $5,000 – $14,000 if we’re tearing out and replacing an existing one. Five variables move you up or down that range.
| Line item | Typical range |
|---|---|
| New concrete driveway (single) | $4,500 – $12,000 |
| Driveway replacement (demo included) | $5,000 – $14,000 |
| Driveway sealing (after curing) | $250 – $700 |
- Size and thickness. A 12×24 foot single drive vs. a 24-foot double is roughly double the concrete and labor. Going to 6 inches for heavy vehicles adds to both.
- Existing condition. Root intrusion, cracked base, or a slab that’s heaved means more demo and more base work. The pour is the same; the prep isn’t.
- Base and drainage scope. On tight lots where water has nowhere to go, a drain line or a regraded swale adds cost but prevents a recurring problem.
- Finish and material grade. Broom finish is the baseline; exposed aggregate and integral color push toward the top of the band.
- Permit scope. Some Lynwood drive projects trigger a permit and inspection; the written estimate states that clearly up front so there are no surprises.
We put all of it in a written, line-item quote with upfront pricing – the number you see is the number you pay. No change orders from us mid-pour.
See the difference
Before
After
Before
After
Before
AfterWhat Lynwood Homes Specifically Do to This Job
Lynwood is a fully built-out, pre-1960s inner-ring LA suburb. Nearly all the work here is remodel, addition, and repair on aging small-lot homes, not new build. That mean the concrete you’re replacing was likely poured decades ago on a base that was never engineered for modern drainage – and the new pour has to account for the way the house, garage, and street sit on a tight lot. Because lots and setbacks are compact and the housing stock is older, a driveway project here often triggers City of Lynwood permits plus upgrades to bring the work up to current seismic and Title 24 standards, including drainage considerations, that a newer neighboring city’s tract homes simply wouldn’t require.
The climate pushes back too. Hot, dry inland summers with intense sun and occasional Santa Ana wind events mean we schedule pours early in the day and cure carefully to avoid rapid surface drying and “craze” cracking. Winter rain means the grading and drainage on any new drive has to be right the first time. And because much of the stock sits close to property lines with detached or attached garages, we’re constantly working around setback and lot-coverage limits that shape where the apron and drive can actually go. We cover all of Lynwood, including the ZIP 90262 area, and just as often work in Lynwood and neighboring Door Installation in Lynwood projects where a garage or entry is being reworked at the same time as the approach.
Serving Lynwood, CA – Our Local Coverage Area
We serve Lynwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Lynwood

A standard concrete driveway in Lynwood takes three to five working days from demo to finish, plus up to 28 days for full cure before heavy use. Weather – hot Santa Ana wind days or winter rain – can extend the schedule, and we’ll tell you up front if it will.
Many driveway and concrete projects in Lynwood do require a City of Lynwood permit and inspection, especially where the work touches drainage or the approach apron, but not every job does. Our written estimate states exactly what permit scope applies – we pull what’s required and get it inspected. Call (833) 842-7204 for an exact answer on your job.
In most cases yes – a driveway replacement stays in the same footprint and doesn’t touch plumbing or structure unless there’s buried conduit or an irrigation line running under the pour. We locate utilities before demo so there are no surprises.
New concrete driveway installation in Lynwood runs $4,500 – $12,000 and a full replacement runs $5,000 – $14,000, depending on size, base condition, finish, and permit scope. Sealing afterward adds $250 – $700. Call (833) 842-7204 for an exact quote – estimates are free.
Every concrete driveway and concrete work we do in Lynwood is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing.
Get a Free Estimate for Concrete Driveways & Concrete Work in Lynwood
Call (833) 842-7204 for a free on-site estimate on your Lynwood concrete driveway or concrete work. A live person answers 24/7 – no voicemail, no waiting until Monday. We’ll walk the site, check the drainage, and hand you a written, line-item quote. Mention the $1,000 off projects over $10,000 and 0% financing for 18 months if you’re ready to schedule. If you’re also weighing the wider scope, see our Driveway & Pavers service.
Written by the team at Groundwork Construction Co.












