







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Impact French Doors Really Cost in Inglewood, CA (And Why Your 1940s Bungalow Costs More)
Impact french doors in Inglewood run $4,200 to $7,800 installed for a typical home, and that’s the honest all-in number – not the $2,000-$6,000 that national cost guides throw around. Those guides assume a standard rough opening that already fits a french door. On a 1940s Inglewood bungalow with a 30-inch original rear door opening set in a load-bearing stucco wall, the opening has to be built before the door is even ordered. Call (833) 842-7204 for a free estimate and we’ll tell you which side of that range your house lands on.
That gap between the national number and the real Inglewood number is where homeowners get blindsided. The bid looks reasonable. Then the change orders show up mid-job because the wall wasn’t what anyone expected. We’d rather explain the whole cost up front.

Why Inglewood’s Older Homes Cost More Than a Guide Says
Inglewood is dominated by 1920s-1950s single-family bungalows and small stucco duplexes, most built before anyone thought about standard rough-opening dimensions. Those rear and side door openings were framed to whatever fit the era – often 30 to 32 inches, sometimes less. A standard impact french door wants a substantially wider opening than what’s there.
Enlarging that opening isn’t a trim job. If the wall is load-bearing (and a rear exterior wall usually is), the header has to be upgraded to carry the load the wall once carried on its own. That’s the structural framing work the national guides never factor in, and it’s the single biggest reason an Inglewood quote climbs past the advertised range. The flats west of Prairie Avenue are full of these houses – and it’s not unusual to find original framing and 1950s-era layers behind a newer wall face once we open things up. We plan for that reality instead of pretending it away.
The Real Line-Item Breakdown for a Coastal LA Bungalow
Here’s how the all-in number actually adds up on a typical Inglewood home. No hidden line, no mystery markup – the number you see is the number you pay.
| Cost component | Typical range |
|---|---|
| Impact-rated french door unit | $1,500-$3,500 |
| Rough opening modification + header upgrade | $800-$2,000 (depends on load-bearing status) |
| Stucco repair + waterproofing around new opening | $400-$900 |
| Installation labor | Balances out to the installed total |
| All-in installed (typical Inglewood home) | $4,200-$7,800 |
A few things move you up or down that range. A wall that turns out non-load-bearing saves the header work. A door unit with heavier multi-point hardware adds to the door line. And the stucco repair number depends on how cleanly the old opening comes out – original stucco over wood lath takes patience and the right patch technique to make the repair disappear.

Why Impact-Rated Beats Standard Even Without Hurricanes
Inglewood sits in the coastal-influenced LA basin near LAX, so it gets marine layer moisture and salt-laden onshore air. There’s no freeze-thaw here – the climate rarely freezes. Exterior finishes age by moisture cycling instead, and standard door bottom seals and threshold weatherstripping typically give out within 3 to 5 years under that sustained cycling.
Impact-rated french doors make more sense here for a structural reason, not a storm reason. They’re built with heavier multi-point locking hardware and compression seals that handle coastal moisture cycling far better than a standard door’s simple sweep. The hardware pulls the door tight against the seal instead of relying on a rubber flap. On a home blocks from event-district Inglewood, where marine air and salt do their slow work, that heavier build is the difference between a door that lasts and one that needs re-sealing in a few years. Built to last, backed in writing.
The Stucco Detail That Separates a Good Install From a Rot Problem
Cutting a new or enlarged opening in original stucco-over-wood-lath walls means the moisture barrier continuity has to be re-established around the new frame. Get that wrong and water finds the gap. On a coastal-adjacent home, a break in that barrier leads to wall rot within years – and it’s work unlicensed crews routinely get wrong because it’s hidden behind the stucco.
We keep that barrier continuous, flash the opening correctly, and repair the stucco so the wall sheds water the way it was designed to. This is the part of the job you can’t see, which is exactly why it matters most. Our technicians have up to 12 years of experience on installs like this, and they arrive background-checked and in uniform. See our full Windows & Doors work for the wider range of exterior door and window systems we install.
Permits and Inspections: The Part You Shouldn’t Skip
Any opening modification over 3 feet requires a permit from the City of Inglewood. That’s not a technicality to route around – the building department has been running tighter inspections since the SoFi Stadium and Intuit Dome build-out, and inspectors are paying close attention to structural work on older homes.
We pull every permit and schedule every inspection as a standard part of the job, not an add-on. That means your project stays clean on record, which matters when you sell – and it means the structural framing gets looked at by someone other than the crew that built it. A permitted, inspected opening is worth more than a quiet one.
Doors We Install, and What Backs the Work
We install Andersen and Marvin impact-rated door systems – both brands with documented performance data for coastal environments. That’s the kind of brand selection that lets you choose on quality rather than whatever’s available that week. The same standard runs across our other trades too, from KraftMaid and Cambria kitchens to GAF and Owens Corning roofing. All of it sits under our curated home construction portfolio.
The 730-Day Done Right Promise covers the installation, not just the door unit. If the install isn’t right, we make it right – one of the longest workmanship guarantees in the residential construction space. Pair that with 0% financing for 18 months and $1,000 off projects over $10,000, and a door replacement that’s been on your list for years becomes doable this season. You can also see the wider Inglewood service area we cover.
- Live person, 24/7 – calls answered around the clock, no voicemail black hole.
- Upfront pricing – the number you see is the number you pay.
- Background-checked, uniformed technicians – verified, not a crew in an unmarked van.
- 730-Day Done Right Promise – workmanship guaranteed for two full years.
Key Takeaways
- Real installed cost in Inglewood: $4,200-$7,800, well above the national $2,000-$6,000 guide.
- Most of the gap comes from rough-opening modification and header work on pre-1950 bungalows.
- Impact-rated units hold up far better to coastal moisture cycling than standard doors.
- Any opening over 3 feet needs a City of Inglewood permit – we handle it as standard.
- Andersen and Marvin doors, backed by the 730-Day Done Right Promise.
FAQs
Impact french doors in Inglewood typically cost $4,200 to $7,800 installed for a standard bungalow, though a home needing a full header upgrade and off-standard framing can land at the top of that range or slightly above. The door unit alone runs $1,500-$3,500. Call (833) 842-7204 for an exact quote – estimates are free.
Yes – any opening modification over 3 feet requires a City of Inglewood permit, and a widened exterior opening almost always qualifies. The building department runs tighter inspections on structural work than it did years ago, so an unpermitted opening is a real risk at resale. We pull every permit and schedule every inspection as part of the job.
Yes, for coastal moisture reasons more than storm ones. Inglewood’s marine layer cycling destroys standard door bottom seals and threshold weatherstripping within 3 to 5 years, while impact-rated units use heavier multi-point hardware and compression seals that hold up far longer. You’re paying for a door that lasts, not just one that resists impact.
No – a door install that involves enlarging an opening, header work, and stucco repair is a multi-day project, and we’d rather tell you that up front than rush it. Small jobs like a straight swap with no framing change move faster. Call (833) 842-7204 to schedule your free estimate and we’ll give you a realistic timeline.
Get a Straight Number Before You Commit
Your Inglewood house isn’t a national average, so it shouldn’t be priced like one. We’ll walk the wall, tell you whether it’s load-bearing, and give you the real all-in number before any door is ordered. Free estimate, free design consult, and a live person on the line 24/7. Call (833) 842-7204 today.
Written by the team at Groundwork Construction Co. of Inglewood, serving Inglewood, CA.
What Our Customers Say
"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson












