







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterGutters & Accessories in Inglewood, CA
Gutter work in Inglewood means replacing or repairing the channels, downspouts, guards and hangers that carry rain off your roof and away from your foundation. Most Inglewood homeowners call us for one of three reasons: their gutters are sagging or pulling loose, water is spilling over the edge during winter storms, or the original aluminum has rusted through after years of dry summers and the occasional hard rain. Groundwork Construction Co. of Inglewood handles the whole job under our Roofing service, which means the fascia, drip edge and gutter line get treated as one system instead of three separate visits from three separate trades.
If you’re hearing a loose gutter bang against the wall during a Santa Ana wind event or you’re seeing a brown streak down the stucco below an overflow point, call us at (833) 842-7204. A live person answers around the clock, and we’ll get a free estimate on the calendar. Every gutter job we run carries the 730-Day Done Right Promise: if it’s not done right, we make it right.
Here’s what matters about Inglewood specifically. Homes across Morningside Park, Century Heights and the streets near Edward Vincent Jr. Park sit on lots where the soil is a mix of sandy loam and older clay fill, and that combination drains unevenly. When a downspout empties straight into a planting strip two feet from the foundation, that clay holds water against the stem wall for days. Gutters that terminate properly, direct water to a splash block or a buried drain, and stay attached through a windstorm do more for a house in this climate than most people realize. Our technicians have up to 12 years of experience with exactly this kind of setup, and they arrive background-checked and in uniform.
Key Takeaways
- Gutter replacement in Inglewood typically runs $1,600 – $4,800 for a whole house, depending on linear footage, material and stories.
- Seamless aluminum in K-style or fascia profile is the standard choice here; copper and steel are available for longer service life.
- Loose hangers, overflow at inside corners and rust-through at the seams are the three most common calls we get in Inglewood.
- Every project is covered by the 730-Day Done Right Promise, plus upfront pricing and 0% financing for 18 months.

When You Need Gutters & Accessories
Gutters fail slowly and then all at once. The early warnings are easy to miss if you’re not looking up at the roofline, and by the time water is pooling at the foundation the damage has usually started. Here are the situations that bring Inglewood homeowners to us.
- Gutters pulling away from the fascia. On older homes near downtown Inglewood, the original spike-and-ferrule hangers loosen after enough heating and cooling cycles. You’ll see a gap open up between the gutter back and the fascia board, and the run starts to slope the wrong way.
- Water sheeting over the front edge during rain. When a gutter is undersized for the roof area it serves, or when a downspout is clogged with seed pods and roof grit, water backs up and spills over the front. That overshoot lands right where your walkway or foundation sits.
- Rust spots and pinhole leaks along the seams. Standard 30-gauge aluminum with sectional seams is where we see the most failures in Inglewood’s climate. Dry summers bake the caulk, and the first real rain finds every gap.
- Staining on stucco or fascia below the gutter line. A vertical brown or green streak on the wall below a gutter is a tell. It means water has been running behind the gutter and down the finish for a while.
- Downspouts discharging at the foundation. Plenty of Inglewood homes have downspouts that end within a foot of the stem wall. That puts roof water exactly where you don’t want it, especially on the flat-ish lots common in the north end of the city.
- Missing gutter guards or screens that have collapsed. If your home sits under a mature ficus, jacaranda or Chinese elm, leaf load is heavy. Guards that were installed years ago and never maintained tend to sag and let debris through anyway.
If you’re seeing any of these, it’s worth a look before the rainy season. We’ll climb up, check the hangers, the slope, the downspout terminations and the fascia behind the gutter, and tell you what actually needs to change. If the fascia or drip edge is compromised, that ties into the broader Inglewood service area roofing work we handle, and we’ll flag it so it gets fixed in the same visit rather than becoming a second project later.
Our Gutters & Accessories Process
Every gutter project follows the same sequence. It’s not complicated, but skipping steps is how gutters end up leaking two winters later. Here’s how we run it.
- On-site assessment and measurement. We get on the roof, measure total linear footage, count the downspouts, and check the fascia and drip edge condition. We also look at where water currently discharges and whether the grade around the house will carry it away. You get a written estimate before anything gets ordered.
- Material and profile selection. Most Inglewood homes are a good fit for seamless K-style aluminum formed on site, which eliminates the mid-run seams that fail first. For longer service life, we also install steel and copper. When the roof itself is being replaced at the same time, we coordinate with the GAF and CertainTeed systems we install so the drip edge and gutter line work together properly.
- Removal and prep. Old gutters come down, and we inspect the fascia board underneath. Rotted or soft fascia gets replaced before new hangers go on. There’s no point hanging a new gutter on a board that won’t hold a screw.
- Fabrication and installation. Seamless runs are formed to length on site, then hung with hidden hangers screwed into the fascia at the spacing the profile needs. We set the slope so water moves toward the downspouts, not away from them, and we seal the end caps and outlets properly.
- Downspout terminations and accessories. Downspouts get routed to discharge where water actually leaves the house. That might mean a splash block, an extension, or a buried drain line to the parkway. We also install gutter guards where leaf load warrants it, and we can add heat cable if your roof has a valley that ices or backs up.
- Water test and walkthrough. We run water through the system, check every joint and outlet, and walk the perimeter with you. If anything drips, it gets fixed before we leave, and the whole job is backed by the 730-Day Done Right Promise.
Most gutter replacements are a one-day job. If fascia repair or downspout rerouting is more involved, it can stretch into a second day, and we’ll tell you that upfront rather than at the end.

Gutters & Accessories Pricing in Inglewood
Gutter replacement in Inglewood typically costs $1,600 – $4,800 for a whole house, with most single-story homes landing between $1,900 and $3,200. Seamless aluminum is the most common choice. Copper and steel run higher, and two-story homes or complicated rooflines with many inside corners push toward the top of the range. These are honest ranges from the work we do in this market, not a bait number designed to change once we’re on the roof.
Here’s the line-item breakdown of what drives the number:
| Item | Typical Inglewood range |
|---|---|
| Seamless K-style aluminum, installed | $9 – $16 per linear foot |
| Steel or copper gutter, installed | $22 – $45 per linear foot |
| Downspouts (per run) | $65 – $150 |
| Gutter guards / screens | $6 – $18 per linear foot |
| Fascia board repair or replacement | $12 – $30 per linear foot |
| Downspout extension or buried drain | $95 – $350 |
| Hanger replacement only (no new gutter) | $8 – $18 per hanger |
A few things move the price in Inglewood specifically. Two-story homes and steep pitches need more labor and safety setup. Heavy tree canopy means more debris load, so guards and hanger spacing matter more. And any rot behind the gutter has to be dealt with before new material goes up, because a new gutter over a soft fascia board will pull loose within a season.
We price the whole job upfront, so the number you see is the number you pay. If you’re pairing gutter work with a roof replacement, ask about the standing promotions: $1,000 off projects over $10,000 and 0% financing for 18 months make larger combined jobs easier to budget. The free project estimate and design consult comes standard. Call (833) 842-7204 to get an exact number for your house.
FAQs – Gutters & Accessories
How much does gutter replacement cost in Inglewood?
Most Inglewood gutter replacements run $1,600 – $4,800 for a whole house, and a typical single-story home lands around $1,900 – $3,200. The final number depends on linear footage, material, number of stories and whether the fascia needs repair. Call (833) 842-7204 for a free on-site estimate; we give you the full price before any work starts.
Can you install gutters the same day?
Yes, most gutter replacements are completed in a single visit once materials are measured for your house. Seamless aluminum is formed on site, so there’s less wait time than sectional systems. If fascia repair or downspout rerouting is needed, it can add a second day, and we’ll tell you that during the estimate.
Do I need gutter guards in Inglewood?
If your home sits under mature ficus, jacaranda or Chinese elm trees, guards are worth it. Those trees drop heavy leaf and seed loads that clog standard gutters quickly. On homes with minimal tree canopy, guards are optional. We’ll give you a straight answer based on what’s actually overhead, not a default upsell.
My gutters are pulling away from the house. Can that be repaired, or do I need new gutters?
It depends on the fascia behind the gutter. If the board is solid, new hangers and a re-slope are often enough to fix a sagging run. If the fascia is soft or rotted, we replace that section before rehanging, because a new gutter on a bad board will fail again. We check both and tell you which fix you actually need.
What material holds up best in Inglewood’s climate?
Seamless aluminum is the practical standard here because it handles the dry summers and rain cycles well and doesn’t rust. Steel and copper last longer and cost more. We install all three, and we’ll walk you through the tradeoffs based on how long you plan to stay in the house.
Does gutter work come with a warranty?
Every gutter project we install is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the installation. Finish materials carry their own manufacturer warranties, and we’ll spell those out in writing with your estimate.
Gutters aren’t glamorous, but they’re the difference between rain leaving your roof cleanly and rain finding its way into your fascia, your stucco and your foundation. If you’re in Inglewood and something about your gutter line looks off, call Groundwork Construction Co. of Inglewood at (833) 842-7204. A live person answers 24/7, estimates are free, and every job carries upfront pricing with no surprises. From foundation to finish line, we’re built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Inglewood, serving Inglewood.


