







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterFence Gates in Inglewood, CA
Fence gates in Inglewood typically cost $450 to $1,900 installed, depending on material, width, and whether the gate is pedestrian or drive-width. A gate is the hardest-working piece of any fence: it swings, latches, and takes a beating thousands of times more than a fixed panel does. Around here, that matters more than it does in most of Southern California.
Here’s what we see in Inglewood specifically. The city sits on old, dense lots where a side yard might be 30 inches wide, and the driveway gate doubles as the only way into a back parking pad. We work on homes from the Craftsmans off Market Street to newer builds near the Crenshaw corridor, and every one of those gates gets the same punishment: coastal marine layer moisture that swells wood, dry Santa Ana heat that shrinks it back, and constant daily use from kids, cars, and deliveries. That swing between wet and dry seasons is why so many gates in Inglewood sag within a few years of installation. A gate hung without proper bracing doesn’t stand a chance.
We install and repair pedestrian gates, driveway gates, and privacy gates as part of our Fence Installation in Inglewood work, using hardware and framing built for that specific cycle. If you need a gate that opens smoothly in August and still latches flush in February, call (833) 842-7204 for a free estimate. Our technicians have up to 12 years of experience, and every gate job is covered by our 730-Day Done Right Promise.

When You Need Fence Gates
Gates fail in predictable ways, and most of those ways show up fast in Inglewood’s climate. Here are the calls we get most often.
- The gate drags on the ground or the concrete. Wood swells in the June gloom and the frame drops just enough to scrape the driveway. By August the bottom rail is splintering. This is the single most common gate call in Inglewood, and it’s usually a hinge and bracing problem, not a gate problem.
- The latch won’t line up anymore. You have to lift the gate with your hip to close it. That shift means the post has moved or the frame has racked, which happens on older posts set in soil that expands and contracts with the seasons.
- You need a driveway gate for a back parking pad. Plenty of Inglewood homes have a driveway running to the rear of the lot, and a swing or sliding vehicle gate is the only thing keeping the car and the yard secure. We build drive-width gates with the framing to handle the span, not a modified walk gate pretending it’s a driveway gate.
- You’re adding a pool and California code requires a self-closing, self-latching gate. Pool safety barriers in Inglewood fall under state pool code, and the gate is a code item, not a style choice. We set hardware that closes and latches on its own every time.
- A security gate is the goal, not just a fence gap filler. A front-yard gate that locks, closes tight, and can’t be lifted off its hinges changes how the whole property feels. We frame the gate with security in mind so the fence line and the gate perform together.
- The dog got out again. A gate that doesn’t close tight or has a gap at the bottom is an escape route. We build gates that sit true to the ground and latch with a positive catch, so a determined dog doesn’t find the weak spot.
Our Fence Gates Process
We don’t hang a gate and hope it stays. Here’s the sequence we follow on gate work in Inglewood.
- Site visit and measurement. We measure the opening, check the ground and the existing posts, and figure out what the gate has to do: swing, slide, lock, close on its own. On sloped or uneven driveways, we note the grade change because that determines how much ground clearance the gate needs.
- Material and style selection. Wood, ornamental metal, or a matching privacy gate that lines up with the rest of your fence. We talk through how each material handles Inglewood’s wet-dry swing so you know what you’re getting into before you commit.
- Framing and bracing plan. This is the step most low bids skip. A gate needs a proper frame, a diagonal brace, and hinges rated for the gate’s weight. Undersized framing is why gates sag, so we build the structure first and finish it second.
- Post setting and gate hang. Gates need real post depth and base, not just an anchor into an old post. We set or reinforce the hinge post, hang the gate with the correct clearance, and check the swing before we call it done.
- Hardware and latch installation. Self-closing hinges, latches, and stops that line up every time. For pool and safety gates, we verify the gate closes and latches on its own, the way the code requires.
- Final walkthrough and cleanup. You open and close the gate yourself. We adjust anything that rubs or catches, walk you through the hardware, and leave the site clean. Every gate is backed by the 730-Day Done Right Promise, so if it starts dragging or the latch stops lining up, we come back and make it right.

Fence Gates Pricing in Inglewood
Fence gate pricing in Inglewood runs roughly $450 to $1,900 for a standard gate installed, and drive-width or sliding gates climb higher. The range is wide because a gate’s cost is mostly about structure and hardware, not raw material. Here’s a line-item look at what drives the number.
| Item | Typical installed range |
|---|---|
| Pedestrian wood gate (single, walk-width) | $450 – $1,100 |
| Pedestrian ornamental metal gate | $700 – $1,500 |
| Drive-width swing gate (wood or metal) | $1,200 – $3,500 |
| Sliding driveway gate | $1,800 – $4,500+ |
| Gate repair (hinges, latch, sag fix) | $150 – $500 |
| Self-closing pool/safety hardware upgrade | $250 – $600 |
What pushes a gate toward the top of the range: wider openings that need heavier framing, slopes and grade changes along the swing path, ornamental metal with custom dimensions, automated or sliding hardware, and old posts that need replacement. What keeps it lower: a standard walk gate that matches an existing fence, decent existing posts, and simple latch hardware. We quote gate repair and gate replacement separately, so you can compare the two before deciding.
Every estimate is upfront, the number you see is the number you pay, and there are no surprise add-ons when the crew arrives. We also offer $1,000 off projects over $10,000 and 0% financing for 18 months, which helps when you’re replacing a gate as part of a larger fence project. Call (833) 842-7204 for your free project estimate and design consult.
How Long Does a Fence Gate Last in Inglewood?
A well-built wood gate in Inglewood lasts about 8 to 12 years with basic hardware upkeep, while ornamental metal can run much longer. The difference between a gate that lasts a decade and one that sags in three years is almost never the material; it’s the framing, the hinge post, and how well the hardware is matched to the gate’s weight. In Inglewood, the marine layer and the inland heat are the real stress test, so a gate built without a diagonal brace and proper post depth will fail early regardless of how good the wood looks on day one. Good hardware is its own long-term investment, and we spec quality brands like Sterling where the fit and finish matter.
Gates vs. the Rest of the Fence: What We Match
A gate that clashes with the fence line looks like an afterthought, and a gate that outbuilds the fence line looks overdone. We match it both ways. Our fence crews work in wood and ornamental materials, and we tie the gate visually to the panels around it, whether that’s a privacy fence, a picket run, or a wrought-iron-style front yard line. If you want to see how the gate fits into the whole property, start with our Fence Installation overview and we’ll scope the gate and the fence together. Materials like CertainTeed fencing components are part of our curated partner set, so you’re choosing durability, not just what happens to be in stock. Built to last, backed in writing.
Why Groundwork Construction Co. for Fence Gates in Inglewood
We’re a full-scope home construction partner, which means a gate is never a one-off job we squeeze in. It’s part of a property we understand, and it comes with the same accountability we put on every project. Calls are answered by a live person, 24/7, so when your gate jams on a Sunday or a driveway gate won’t latch before work on Monday, you reach a person, not a voicemail. Our technicians are background-checked and arrive in uniform, and every job comes with upfront pricing and no surprises. And the 730-Day Done Right Promise sits over all of it: if the gate isn’t done right, we make it right. From the first measurement to the last latch adjustment, we treat the gate like the structural component it actually is.
We also work across the trades, so if a gate replacement is part of a bigger yard or driveway project, we can coordinate it. Our home page lays out the full range of what we do, and we’re happy to look at the gate alongside whatever else is on your list.
FAQs – Fence Gates
How much does a fence gate cost in Inglewood?
A standard pedestrian fence gate in Inglewood costs about $450 to $1,100 installed, and a drive-width or sliding gate runs $1,200 to $4,500 or more depending on size and hardware. The main cost drivers are the width of the opening, the material, the framing, and whether existing posts can be reused. Call (833) 842-7204 for an exact quote; estimates are free.
Can you repair a sagging gate instead of replacing it?
Yes, in most cases a sagging gate is a hinge, bracing, or post problem rather than a reason to replace the whole gate, and repair typically runs $150 to $500. A gate that drags on the ground or won’t latch is usually fixed by re-bracing the frame, replacing worn hinges, and re-setting or reinforcing the hinge post. We’ll tell you honestly when a repair makes sense and when replacement is the smarter spend. Call (833) 842-7204 and we’ll take a look.
Do you install self-closing gates for pools in Inglewood?
We install self-closing, self-latching gates that meet California pool safety code, with hardware that closes and latches on every swing. Pool barrier code in California requires the gate to close and latch on its own, and we verify that on the final walkthrough rather than trusting the box. If the gate is part of a pool fence build, we handle both together. Call (833) 842-7204 to schedule a free estimate.
How long does a fence gate installation take?
Most single pedestrian gates are installed in a single visit, and drive-width or sliding gates usually take a bit longer because of framing and hardware work. When posts need replacement or the ground needs prep, we add that time into the estimate up front so you’re not surprised on install day. We confirm the schedule when we quote. Call (833) 842-7204 for a free project estimate and design consult.
Get Your Fence Gate Done Right
A gate is the part of the fence you actually touch every day, and it should open, close, and latch without a thought. If yours drags, sticks, or won’t lock, or if you’re adding a new gate to your property, call Groundwork Construction Co. of Inglewood at (833) 842-7204 for a free estimate. We answer with a live person, 24/7, we price upfront, and every gate we install is backed by the 730-Day Done Right Promise. Built to last, backed in writing.
Key Takeaways
- Fence gates in Inglewood run about $450 to $1,900 installed, with drive and sliding gates higher.
- The marine layer and inland heat cycle is the leading cause of sagging gates in Inglewood; framing and bracing fix it.
- We repair as well as install, and pool gates come with self-closing, self-latching hardware that meets state code.
- Every gate job gets the 730-Day Done Right Promise, upfront pricing, and a live person on the phone 24/7.
Written by the team at Groundwork Construction Co. of Inglewood, serving Inglewood.


