







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Inglewood Homeowners Choose Belgard Construction
Groundwork Construction Co. of Inglewood provides independent Belgard construction and repair service across Inglewood, building pavers, retaining walls, and porcelain slab systems that hold up under local soil and moisture conditions. We’re not affiliated with or authorized by Belgard – we’re an independent installer who works with Belgard products because they perform well when the base and drainage are built right. What sets our Belgard work apart is that we spec every project for Inglewood’s expansive clay and coastal marine layer rather than a generic install manual. Call (833) 842-7204 for a free estimate.
Why Trust Groundwork Construction Co. of Inglewood for Your Belgard Construction?

Our technicians have up to 12 years of experience installing Belgard systems, and they know each series on its own terms. Catalonia pavers behave differently from Dimensions porcelain. Urbana wall units fail in ways Bristol Bay blocks don’t. That specificity matters here, because Inglewood’s building stock and soil conditions punish generic installs.
We use genuine Belgard units and matching accessories whenever dimensional or color consistency matters across a visible field – which is most residential work. For joint sand and edge restraint, we’ll use quality aftermarket products where they outperform the OEM spec, and we’ll tell you why. Every install is built with the base and drainage that the Belgard product actually calls for, not whatever is fastest.
All Belgard work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Pricing is upfront with written line-item quotes, and the number you see is the number you pay. We pull the Inglewood permits the work requires and stand behind the inspection. Every technician is background-checked and arrives in uniform, and calls are answered by a live person 24/7.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Inglewood
Belgard failures in Inglewood almost always trace back to three things: base compaction, drainage, and product-to-application mismatch. Here’s what we see most often and why it happens.
- Catalonia pavers shifting and deforming. Where the base was laid too thin or not compacted in lifts over Inglewood’s expansive clay, the pavers move as the soil swells and shrinks through wet and dry cycles. You’ll see depressions and rocking units, usually along the driveway’s wheel paths first. The product isn’t the problem – the base is.
- Efflorescence bloom on Urbana walls and Bristol Bay blocks. That white powdery haze is mineral salt wicking to the surface as moisture moves through the concrete. On an improperly sealed or poorly drained wall system, moisture keeps migrating, and the bloom keeps coming back. Correct the drainage and sealing, and it stops recurring.
- Porcelain slab edge chipping on Dimensions installs. Chip-outs at driveway aprons and patio borders happen when slabs go down without proper edge restraint, or when rigid mortar joints leave no flexibility for the slight movement clay soils produce. Dimensions porcelain needs a restrained edge and a joint system that can flex.
- Joint sand washout and settlement in low spots. Where surface drainage wasn’t graded away from the house, water pools, sand rinses out, and the field settles. This one is common on the older Inglewood lots where the grade runs toward the structure rather than away.
- Cracked or leaning retaining walls from hydrostatic pressure. Concrete wall units crack or lean when water builds up behind them and the drainage detail was skipped. On Inglewood’s clay, water doesn’t drain freely, so a wall without proper backfill drainage is under constant load. We rebuild the drainage as part of the wall repair.
Belgard Parts & Our Repair-vs-Replace Approach

We source genuine Belgard units and matching accessories through supplier channels so color and dimensions stay consistent across a repaired or expanded field. We also spec quality aftermarket polymeric joint sands and edge restraints where they hold up better than OEM – that’s a judgment call we make per job and explain before we start.
We don’t claim to stock Belgard parts locally. Materials are sourced for each project, which keeps what you get matched to your existing field instead of whatever happens to be sitting on a shelf.
Repair wins over replacement when the base and drainage are sound and the issue is surface-level: washed-out joints, isolated settlement, edge restraint failure, or efflorescence on a wall. Replacement is the honest answer when the base itself is compromised across the field or the wall system is failing structurally. We’ll show you which one your situation is. Call (833) 842-7204 for a free estimate and an honest read on repair versus replace.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We inspect the actual Belgard product, the base, the edge restraint, and the drainage path. We check the grade relative to the house and look for where water is going. You get a written assessment before any work.
- 2
Scope and quote. You receive a line-item, upfront price covering removal, base work, restraint, and materials. No change orders. We specify genuine Belgard units where consistency matters and name any aftermarket components upfront.
- 3
Repair or install. Base is compacted in lifts to the depth the product requires. Belgard units are set true, edge restraint is installed, and joint sand is graded to drain away from the foundation. Permits pulled where Inglewood requires them.
- 4
Test and walkthrough. We water-test the drainage, check the field for rocking units, and walk the finished work with you so you can verify it before we close out.
- 5
Warranty. The full 730-Day Done Right Promise applies – if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Inglewood
We work across the Belgard product families most commonly found on South LA County properties. That includes Catalonia pavers for driveways and patios, the Urbana stone wall system for freestanding and retaining walls, Dimensions porcelain pavers for modern slab installations, and Bristol Bay retaining wall blocks for grade changes and terracing. We install on new builds, repair existing fields, and rebuild systems where the base or drainage has failed. On Inglewood properties we also handle paver driveway installation, paver patio installation, and full driveway replacement where the existing surface won’t support a sound repair.
We Also Service These Brands
Belgard is one of many brands we work with. Our crews also handle KraftMaid cabinetry, Kohler fixtures, GAF roofing systems, and PGT windows and doors, so a single project that spans multiple trades doesn’t need three different contractors. If your Inglewood project involves a driveway and a front entry refit, or a patio and a new door, we can scope it together under one upfront quote and one warranty.
FAQs – Belgard Construction Service in Inglewood

Can Belgard pavers be installed over existing concrete in Inglewood? Sometimes, but only when the existing concrete is structurally sound, level, and has positive drainage – otherwise it’s a shortcut that fails within a few seasons on Inglewood’s clay. We inspect the slab before recommending it. Call (833) 842-7204 for a free assessment.
Why is my Belgard Urbana wall showing white powder? That white powder is efflorescence, mineral salt wicking to the surface as moisture moves through the concrete units. It points to moisture getting into the wall and not draining out. Fixing drainage and sealing correctly stops it from recurring – just washing it off won’t.
What base depth is required for Belgard Catalonia pavers on a driveway in Inglewood? Driveway applications need a deeper, compacted aggregate base than a patio, compacted in lifts, because vehicle loads over expansive clay demand it. Skipping the depth or the lifts is the single most common cause of the settling we repair. Call (833) 842-7204 for a quote specific to your site.
Do Belgard Dimensions porcelain pavers need sealing? Porcelain is dense and resists staining on its own, but the joint system and the edge restraint need attention, and a sealer on the joints helps keep sand in place. On Inglewood installs we focus on restraint and flexible joints first.
How do I fix joint sand washing out of my Belgard paver patio every rainy season? Repeated washout means water is running across or pooling on the field instead of draining off it, usually a grading issue. Polymeric joint sand helps, but the real fix is correcting the surface drainage. Call (833) 842-7204 and we’ll diagnose it.
How much does Belgard construction cost in Inglewood? Typical ranges below. Every quote is line-item and upfront, and we never change the number once work starts.
| Service | Typical Inglewood Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Driveway Sealing | $250 – $700 |
Call (833) 842-7204 for an exact quote – estimates are free.
Book Your Belgard Service in Inglewood, CA
If your Belgard driveway, patio, or wall needs repair or a fresh install, call Groundwork Construction Co. of Inglewood at (833) 842-7204. We’ll inspect the base and drainage, give you a written upfront quote, and back the work with the 730-Day Done Right Promise. Free estimates, and a live person answers whenever you call.
Written by the team at Groundwork Construction Co. of Inglewood.












