







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBathtub Replacement in Inglewood, CA
Bathtub replacement in Inglewood typically runs $1,800 to $6,500 for a full tear-out and install, and most jobs are finished in one to two days. If your tub is cracked, rusted through the enamel, leaking at the drain, or too shallow and narrow for the people who actually use it, replacing it is usually smarter than resurfacing. Groundwork Construction Co. of Inglewood handles bathtub replacement as part of a larger Bathroom Remodeling scope or as a stand-alone swap, with upfront pricing and our 730-Day Done Right Promise behind the work.
We’ve pulled a lot of old cast-iron and steel tubs out of Inglewood homes. The housing stock here runs from 1920s bungalows near Downtown Inglewood to mid-century tract homes in Morningside Park to newer townhomes off La Brea. Each one has its own quirks: galvanized drain lines that crumble when you touch them, subfloors that were never meant to carry a 300-pound tub, and valve bodies buried in walls with no access panel. We plan for those before demo day, not after. Call (833) 842-7204 and a live person picks up, 24/7.
Every technician who walks into your home is background-checked and arrives in uniform. Our technicians have up to 12 years of experience on tub and shower installs, which matters most when a wall has to be opened, a drain has to be reworked, or a new tub doesn’t line up with the old footprint.
Key Takeaways
- Most Inglewood bathtub replacements cost $1,800 to $6,500, depending on tub type, drain condition, and whether tile or wall surround work is included.
- A standard alcove tub swap is usually a one-day job. Tub-to-shower conversions and cast-iron removal take longer.
- Older Inglewood homes often need drain and valve work once the wall opens up. We price that upfront instead of surprising you mid-job.
- We back the installation with the 730-Day Done Right Promise. If it’s not done right, we make it right.
- 0% financing for 18 months and $1,000 off projects over $10,000 apply to full bathroom remodels that include the tub.

When You Need Bathtub Replacement
Resurfacing buys you a few years at best. Replacement is the right call when the tub itself is failing, when the surround is letting water behind the wall, or when the tub no longer fits how you live. Here’s what we hear most from Inglewood homeowners:
- The enamel is worn, chipped, or rusting through. Cast-iron tubs in 1940s and 1950s Inglewood homes often have rust blooms around the drain and overflow. Once rust reaches the iron, refinishing peels within a year or two.
- Water is leaking at the drain or overflow. A slow leak under the tub rots the subfloor and stains the ceiling below. In two-story homes near Century Boulevard, we’ve opened ceilings to find joists softened by a leak that had been running behind the wall for months.
- The tub is too small or too deep. Original 4.5-foot tubs from mid-century builds feel cramped to anyone taller than about 5’8″. A 5-foot or 5.5-foot replacement makes daily use far more comfortable.
- You want a walk-in or low-threshold tub. Households with older family members or anyone managing mobility issues benefit from a lower step-over. We’ll talk through structural and drain considerations before committing.
- Cracks in fiberglass or acrylic. Hairline cracks in builder-grade fiberglass tubs spread. A patch is temporary; a replacement tub in a heavier-gauge acrylic or a Sterling unit holds up far longer.
- The tub is part of a larger bathroom project. If you’re already replacing the vanity, tile, or toilet, doing the tub at the same time saves on demo and disposal costs.
If your tub situation is tangled up with a vanity or shower problem too, it’s often worth pricing the whole room. Our Bathroom Remodeling in Inglewood page covers what a full-scope remodel looks like and how we sequence trades so nothing gets torn up twice.
Our Bathtub Replacement Process
Here’s how a Groundwork bathtub replacement actually runs, from first call to final walkthrough. Every step is planned upfront so there’s no guesswork on your end.
- Free estimate and design consult. We measure the existing tub, check the drain and valve, look at the subfloor, and talk through tub options: standard alcove, soaking, walk-in, or tub-to-shower conversion. You get an upfront number in writing. The price you see is the price you pay.
- Material selection. We carry a curated set of brands across every trade, including Sterling and Grohe for bath fixtures. For a tub replacement, that means choosing a tub model, drain trim, and shower valve that fit your budget and your room’s plumbing rough-in.
- Protection and demo. We lay floor protection, shut off water, and pull the old tub. Cast-iron tubs come out in pieces, which takes a bit longer than acrylic but protects your door frames and stairwells. Debris leaves the same day.
- Subfloor and rough-in inspection. With the tub out, we check for rot, confirm the drain and overflow are sound, and look at the valve body. If anything needs replacing, we tell you before we proceed and price it as a written change order.
- Install and finish. We set the new tub level, connect the drain and overflow, install the valve trim and surround, then seal every joint that sees water. Tile or prefab surround goes in around the tub, not after.
- Final walkthrough. We fill the tub, drain it, run the shower, and check for leaks at the access panel. You get a walkthrough of what was done, along with the paperwork for our 730-Day Done Right Promise. If it’s not done right, we make it right.
Most standard alcove tub swaps finish in a single visit. Tub-to-shower conversions and jobs that need new tile or drain relocation usually take two to four days. We tell you which bucket your job falls in before we start.
Safety Note on Tub and Drain Work
Removing a cast-iron tub, opening a wall to reach a valve, or reworking a drain line involves sharp edges, heavy loads, and water damage risk that can get worse fast if a joint isn’t seated right. We don’t recommend a DIY tear-out for these. A trained installer checks the drain slope and the waterproofing behind the surround, which is where most callback leaks originate.

Bathtub Replacement Pricing in Inglewood
Bathtub replacement in Inglewood runs $1,800 on the low end for a straight acrylic swap to $6,500 or more when the surround is replaced, the drain and valve are reworked, and the subfloor needs repair. Here’s what actually moves the number.
| Item | Typical Range in Inglewood |
|---|---|
| Standard acrylic or fiberglass alcove tub, installed | $1,800 – $3,400 |
| Cast-iron or heavier soaking tub, installed | $3,200 – $5,800 |
| Tub-to-shower conversion (tub out, shower pan and surround in) | $4,200 – $8,500 |
| Drain and overflow replacement | $250 – $650 |
| Shower valve replacement (while the wall is open) | $400 – $1,100 |
| Subfloor repair for rot | $300 – $1,200 |
| Tile surround around tub | $900 – $3,500 |
Inglewood pricing runs close to the regional average, generally a bit below West LA and a bit above the South Bay. Three things tend to push jobs higher here:
- Older drain lines. Galvanized drains in pre-1960 homes often need replacement once they’re exposed. We don’t discover that mid-job. We check at the estimate.
- Access. Second-floor bathrooms with no access panel mean more drywall work. We’ll quote that in the same estimate.
- Surround material. A tile surround adds time and cost versus a prefab surround, but it usually lasts decades longer in a full bathroom remodel.
If your budget covers the whole room, our home page maps out our seven service lines, and 0% financing for 18 months plus $1,000 off projects over $10,000 apply to remodels that meet the threshold. No-hassle upfront pricing means the number on the estimate is the number you pay for the work listed. Anything extra gets approved in writing before we touch it.
For neighborhoods like Lennox, Hyde Park, and Crenshaw Manor, we can often schedule the estimate within a few days and pull the tub the same week. Call (833) 842-7204 to get on the calendar.
Why Inglewood Homeowners Choose Groundwork
Bathtub replacement is straightforward on paper. In practice, it’s where small shortcuts show up six months later as a soft spot under the tub or a stain on the ceiling below. We’ve built the way we work around avoiding that.
- Upfront pricing, no surprises. Every estimate is written and includes what’s covered and what isn’t.
- Background-checked, uniformed technicians. You know who’s in your home and that they’re verified before they cross the threshold.
- 730-Day Done Right Promise. If the install isn’t right, we come back and make it right. That’s the whole promise.
- Curated brand partnerships. We spec from brands we trust, including Sterling and Grohe for bath fixtures, so you’re choosing quality, not just availability.
- Live person, 24/7. Calls are answered around the clock by a real person. No voicemail tunnel, no waiting until Monday.
Groundwork Construction Co. of Inglewood has been in business since 2014 and handles kitchen remodels, bathroom remodels, roofing, windows and doors, fencing, driveways and pavers, and home additions and ADUs. For homeowners planning a full-scope remodel, that means one contractor from foundation to finish line.
FAQs – Bathtub Replacement
How much does bathtub replacement cost in Inglewood?
Bathtub replacement in Inglewood typically costs $1,800 to $6,500, with the low end covering a standard acrylic alcove swap and the high end covering cast-iron or soaking tubs, surround work, drain and valve replacement, and any subfloor repair. Tile surrounds, cast-iron removal, and second-floor bathroom access all push the number up. Call (833) 842-7204 for a free estimate with a firm range for your specific bathroom.
Can you replace a bathtub in one day?
Most standard alcove bathtub replacements finish in one day. Our technicians pull the old tub, inspect the subfloor, set the new tub, and complete the plumbing and surround in a single visit for jobs that don’t require drain relocation or new tile. Tub-to-shower conversions and jobs that need drain or valve rework usually take two to four days. Call us and we’ll tell you which one your project falls into.
Is it cheaper to repair, refinish, or replace my bathtub?
Refinishing a tub costs $400 to $900 and buys roughly three to five years, while replacement costs more but lasts decades. If the tub is cracked, rusted through the enamel, or leaking at the drain, refinishing doesn’t fix the underlying problem and replacement makes more sense. For a tub in good structural shape with only cosmetic wear, refinishing can be a reasonable bridge. Call (833) 842-7204 and we’ll give you a straight answer for your tub – no pressure to replace if repair is the smarter call.
Do you remove the old tub and haul it away?
Yes. Every bathtub replacement from Groundwork includes removal and haul-away of the old tub on the same day, including cast-iron tubs that need to be cut up to come out. We protect floors and door frames during removal and leave the room broom-clean. Call (833) 842-7204 to schedule a free estimate and confirm what’s included for your specific tub.
Do you handle permits for bathtub replacement in Inglewood?
Permit requirements depend on what’s moving. A straight tub swap in the same location typically doesn’t require a permit, but relocating the drain, changing the valve, or doing a tub-to-shower conversion often triggers one, and the City of Inglewood’s building department will want to see the plumbing rough-in. We’ll tell you at the estimate whether your job needs a permit and handle the paperwork if it does. Call us to talk through your specific scope.
What brands do you use for tubs and fixtures?
We install tubs and fixtures from a curated set of brands including Sterling and Grohe, and we spec waterproofing materials from manufacturers we trust. The brand set isn’t the same for every job; we match the product to your room’s rough-in and your budget. Call (833) 842-7204 to talk through options for your bathroom.
Schedule Your Bathtub Replacement in Inglewood
If your tub is cracked, leaking, or just too small for the household, we can get a technician out, measure the room, and give you a written upfront estimate. Calls are answered by a live person 24/7, so you won’t wait until Monday morning for a callback. Same-week scheduling is often available for Inglewood, and our 730-Day Done Right Promise covers the install. Call (833) 842-7204 for a free estimate and design consult, and we’ll walk through your options before you commit to anything.
Written by the team at Groundwork Construction Co. of Inglewood, serving Inglewood.


