







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Cabinet Refacing Costs in Inglewood, CA – And Why the Quote You Get Isn’t the Quote You Pay
Refacing kitchen cabinets in Inglewood usually runs $4,000-$13,000 for veneer, doors, drawer fronts, and hardware, with most 1940s bungalows landing between $6,000 and $9,500 once the boxes are squared and stabilized. That range only holds if the contractor inspects what’s behind the cabinet boxes before locking a price. On the flats off Centinela, it’s not unusual for a $4,000 refacing quote to climb 30-40% the moment a crew pulls the wall cabinet above an original tile backsplash and finds water-damaged sheathing nobody priced for. Call (833) 842-7204 for a free estimate built on what’s actually in your walls, not a number pulled from a spreadsheet.
Key Takeaways
- Veneer and hardware alone: $4,000-$7,500 for a typical Inglewood kitchen.
- Structural repairs to aging cabinet boxes: $1,200-$4,500, and this is the line most bids leave out.
- Electrical updates triggered by new overhead lighting: $1,800-$6,500.
- If the refacing quote climbs within $1,500 of a KraftMaid semi-custom replacement, replacement wins on longevity.

Why 1940s Inglewood Bungalows Break the Standard Refacing Math
Inglewood’s flats are dominated by 1920s-1950s single-family bungalows and small stucco duplexes, and most of those kitchens have never had a permitted remodel. The cabinets in them have spent 70+ years absorbing marine layer moisture rolling in off LAX, then drying out through summer. That humidity cycling does slow, quiet damage to particleboard and plywood boxes – delamination, swelling at the seams, soft corners where the face frame meets the side panel. None of it is visible from the front of the cabinet. All of it matters the day you glue a new veneer skin over it.
This is where refacing jobs quietly turn into replacements mid-project, and where a homeowner who budgeted $4,500 ends up signing a change order for $11,000. The fix isn’t complicated: a cabinet-box integrity inspection happens before the quote is signed, not after the crew shows up. We probe the boxes, check the face frames for rack, look at the subfloor under the sink cabinet for old leaks, and photograph what we find. Then the number we give you is the number you pay. That’s what upfront pricing, no surprises actually means in a house built before 1950.
The Three-Tier Cost Structure for Cabinet Refacing in Inglewood
Refacing prices get quoted as a single line item. That’s the problem. Here’s how the cost actually breaks down on an Inglewood kitchen, tier by tier.
| Cost Tier | What It Covers | Inglewood Price Range |
|---|---|---|
| Tier 1: Veneer & hardware | Real wood or rigid thermofoil veneer on boxes, new doors and drawer fronts, hinges, pulls, soft-close hardware | $4,000-$7,500 |
| Tier 2: Structural repairs to aging boxes | Delaminated panel replacement, face-frame squaring, subfloor patching under sink cabinets, moisture remediation | $1,200-$4,500 |
| Tier 3: Electrical updates | New overhead lighting circuits, GFCI outlets inside cabinets, panel capacity check, junction box replacement for aging knob-and-tube | $1,800-$6,500 |
Tier 2 and Tier 3 are where Inglewood refacing jobs live or die. Contractors working west of Prairie Avenue routinely find original knob-and-tube wiring feeding a kitchen that was “updated” in 1985 without a permit. The moment a new under-cabinet lighting circuit goes in, that legacy wiring has to be addressed – and if the job touches electrical outlets or plumbing valves inside the cabinets, the City of Inglewood requires an inspection even though cosmetic refacing alone doesn’t need a permit. Unpermitted legacy work in those walls can surface mid-job as a stop-work issue, and that’s a cost nobody’s original bid accounted for.
If you’re planning a larger scope than refacing can honestly solve – new layout, relocated sink, added island – it’s usually smarter to price the full job. Our Kitchen Remodeling work runs $14,000-$45,000 in Inglewood, and a small kitchen remodel sits at $9,000-$20,000. For comparison, a standalone cabinet installation runs $4,000-$13,000, and countertops add $2,000-$6,500 on top. Those numbers exist for the same reason refacing numbers do: they reflect the actual house, not a template.

The Decision Fork: When Refacing Stops Making Sense
There’s a specific dollar threshold where the math flips. If your refacing quote – all three tiers, honest total – lands within $1,500 of a KraftMaid semi-custom replacement, replacement wins. That’s the line. Above it, refacing is the better value. Below it, you’re paying nearly new-cabinet prices for a skin over a box that’s already lived 75 years.
Why KraftMaid specifically? Because semi-custom gives you the layout flexibility and the drawer-box quality that a refaced 1948 cabinet can’t match, at a price point that doesn’t require full custom cabinetry. Groundwork carries a curated set of top-tier brands for exactly this reason – KraftMaid and Cambria in kitchens, Kohler in baths – so the decision is about what lasts, not what the supply house happens to have on the floor. A refaced box with brand-new doors still has the same box. A semi-custom KraftMaid install replaces the whole assembly, and it comes with the same 730-Day Done Right Promise as everything else we build.
What Inglewood Permits Actually Require During a Refacing Job
Cosmetic refacing – veneer, doors, drawer fronts, hardware – does not require a City of Inglewood permit. That’s the good news. The bad news is that most real refacing jobs in Inglewood touch more than veneer. The moment a contractor moves an outlet, adds an in-cabinet appliance circuit, or replaces the shutoff valve under the sink, the scope crosses into permitted territory and triggers an inspection.
The building department has been under heavy volume pressure since the SoFi Stadium, Intuit Dome, and Kia Forum build-out pushed permit review into overdrive, and that scrutiny has spilled over onto residential legacy work. Unpermitted additions and old electrical that were quietly grandfathered for decades are getting flagged now. Getting the inspection right the first time is cheaper than the stop-work order that comes from skipping it. If your refacing plan includes new overhead lighting, it will include electrical work – and the $1,800-$6,500 Tier 3 number above is real, not a scare tactic.
Why the Warranty Matters More Than the Price
Most cabinet refacing warranties cover labor for 90 days. Think about what fails at month 14 on a refaced cabinet in Inglewood: the veneer peels at a seam where moisture got behind it, a hinge pulls out of a soft box, a drawer front delaminates. Exactly the defects that show up after a 90-day window closes. Groundwork’s 730-Day Done Right Promise covers delamination, hinge failure, and veneer peeling for two full years, backed in writing. If it’s not done right, we make it right. That’s a different posture from a handshake and a one-year labor note.
Technicians on every job are background-checked and arrive in uniform. Calls are answered by a live person, 24/7 – not a voicemail box that fills up over the weekend. And the crew showing up at your Inglewood door has up to 12 years of hands-on experience with exactly this kind of pre-1950 construction.
FAQs
Cabinet refacing in Inglewood typically costs $4,000-$13,000, with most pre-1950 bungalows settling between $6,000 and $9,500 once box repairs and electrical updates are included. The low end reflects kitchens where the boxes are solid and no lighting changes are planned. The high end reflects older homes where delaminated panels and legacy wiring surface during the job. Call (833) 842-7204 for an exact quote – estimates are free and include the box inspection.
Refacing is cheaper than replacement when the existing boxes are structurally sound and the quote stays more than $1,500 below a KraftMaid semi-custom replacement. Once the refacing quote closes that gap, replacement wins because you get new boxes, new drawer construction, and a longer service life for roughly the same money. The honest answer depends entirely on what’s inside your specific cabinets, which is why the inspection happens before the quote, not after.
Cosmetic refacing does not require a City of Inglewood permit, but any work that touches electrical outlets, in-cabinet appliance circuits, or plumbing shutoff valves inside the cabinets does trigger an inspection. Most real refacing jobs in Inglewood fall into that second category once new overhead lighting enters the plan. Getting it permitted up front is faster and cheaper than addressing a stop-work order later. Call (833) 842-7204 and we’ll tell you which side of that line your project lands on.
Most refacing jobs in Inglewood take three to five working days on site, plus a measurement and box-inspection visit before the work starts. Jobs that include electrical updates add one to two days for the inspection window. Your kitchen stays usable through most of the process – we don’t tear out the sink or the range unless the scope requires it.
Get an Exact Refacing Number Before You Commit
A real refacing quote for an Inglewood home starts with opening the cabinet above the backsplash, not with a per-linear-foot formula. Groundwork Construction Co. of Inglewood offers free project estimates and design consults, upfront pricing with no surprises, and 0% financing for 18 months on qualified projects – plus $1,000 off any project over $10,000. Call (833) 842-7204 today, and we’ll put a live person on the line and a written number in your hands. If you’re comparing refacing against a full kitchen scope, start with our Kitchen Remodeling in Inglewood page, or head back to the home page to see the full picture.
Written by the team at Groundwork Construction Co. of Inglewood, serving Inglewood, CA.
What Our Customers Say
"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson












