







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Bathroom Vanity Installation Costs in Inglewood, CA
Bathroom vanity installation in Inglewood typically runs $800 to $3,000 for the vanity and labor alone, and $900 to $4,000+ once you account for what’s actually behind the old cabinet: corroded galvanized supply lines, a tired p-trap, and sometimes a GFCI outlet that needs a permit. In an Inglewood home built before 1970, the vanity isn’t the hard part. The corroded supply lines hiding behind it are. Call Groundwork Construction Co. of Inglewood at (833) 842-7204 for a free estimate and a straight answer on what your wall is holding.
Key Takeaways
- Vanity unit: $300-$2,500 depending on brand, size, and whether the core is plywood or particleboard.
- Installation labor: $250-$600 for a standard swap, more if plumbing or electrical moves.
- Galvanized supply line replacement: $150-$400 when the old steel won’t survive the disturbance.
- Drain assembly and p-trap: $80-$200.
- GFCI permit if electrical work is involved: $100-$250.
- The $300 “installation only” quote that skips the supply line inspection is an $800 emergency call waiting to happen.

Why Inglewood Vanity Swaps Rarely Stay Simple
The flats west of Prairie Avenue are full of 1920s to 1950s bungalows and small stucco duplexes, and plenty of them still have the original galvanized steel supply lines feeding the bathroom sink. Galvanized pipe corrodes from the inside out over 40 to 60 years. By the time a homeowner is ready for a new vanity, those lines are often restricted to a pencil-thin flow and flaking rust into the water. Touching them during a swap is like nudging a scab: sometimes it holds, and sometimes the wall opens up and you’re chasing a leak at 9 p.m.
This is where a cheap quote gets expensive. A contractor who quotes labor only and never inspects the shutoff valves and supply stubs is not protecting you. A real inspection takes ten minutes, and it tells you whether the job is a $300 swap or a $700 swap with new braided stainless lines. We’d rather tell you upfront than bill you for an emergency.
What to Look for in a Vanity Installation Quote
Compare bids line by line, not on the bottom number. A complete quote names the vanity brand, states whether the cabinet core is plywood or particleboard, includes supply line and drain scope, and flags any electrical work that triggers a permit. An incomplete quote leaves those blank and surprises you later.
- Named vanity brand and construction. Groundwork doesn’t spec generic “vanity cabinets.” We specify named brands with known construction and warranty terms, so you know exactly what’s behind the doors before demo starts.
- Supply line inspection in writing. The bid should say whether the existing lines are copper, PEX, or galvanized steel, and what happens if they need replacement.
- Drain and p-trap scope. Reusing a 50-year-old p-trap under a new cabinet is a leak waiting to happen.
- Electrical and GFCI. Any new or relocated outlet in a bathroom needs GFCI protection under California electrical code, and that means a permit through the City of Inglewood.
- Warranty terms you can read. Ours is the 730-Day Done Right Promise: if it’s not done right, we make it right.

How much does bathroom vanity installation cost in Inglewood?
Most Inglewood vanity installations land between $800 and $4,000 all-in, with the median closer to $1,400 for a mid-size plywood-core unit with new supply lines and drain. The table below breaks out each component so you can see where the money actually goes.
| Cost component | Typical range |
|---|---|
| Vanity unit (brand, size, core) | $300-$2,500 |
| Installation labor | $250-$600 |
| Galvanized supply line replacement | $150-$400 |
| Drain assembly and p-trap | $80-$200 |
| GFCI outlet permit (if electrical work) | $100-$250 |
| Realistic total | $800-$4,000 |
If the vanity is part of a larger refresh, our Bathroom Remodeling in Inglewood page covers full bathroom scope in the $9,000-$28,000 range, which is often the better call when tile, lighting, and layout are all on the table. For a wider view of how we handle single rooms end to end, see Bathroom Remodeling.
Does the vanity material really matter in Inglewood’s climate?
Yes, and more than most homeowners expect. Inglewood sits near LAX in the coastal-influenced basin, which means marine layer moisture and salt-laden onshore air for much of the year. Particleboard-core vanity cabinets common at big-box stores swell and delaminate in that humidity, especially on the toe kick and the back panel facing the wall. Plywood-core or solid-wood construction is the right spec here, and we build that into the material recommendation as a baseline, not as an upsell. This is part of why we specify named brands with known construction quality rather than whatever’s on the floor that week.
The supply line issue, in plain terms
Galvanized steel was the standard for residential plumbing from roughly the 1920s through the 1950s. It rusts from the inside out. By the time you’re pulling a vanity, those lines are 60 to 100 years old. Replacing them with braided stainless supply lines during a vanity swap is cheap insurance: $150 to $400 for the pair, versus a few thousand if a line fails behind a brand-new cabinet and the wall has to come open. Your home deserves the ten-minute inspection either way. If a contractor won’t do it, that tells you something.
FAQs
Bathroom vanity installation in Inglewood runs $800 to $4,000 all-in, or $800 to $3,000 if you’re only pricing the unit and labor. The spread comes down to the vanity brand, whether the existing galvanized supply lines survive the swap, and whether new GFCI outlets trigger a permit. Call (833) 842-7204 for an exact quote - estimates are free.
Replacement is usually cheaper than repair on a cabinet older than about 20 years, because the fixes (new doors, drawer boxes, and re-sealing) often cost more than a mid-range plywood-core unit. If only the faucet or drain is leaking, repair the fixture first. Once the cabinet core is soft or the finish is failing, replacement wins. Call us and we’ll tell you which side of that line your vanity is on.
Many standard vanity swaps are completed in a single visit when the plumbing and electrical are already in good shape. When galvanized supply lines need replacement or an electrical permit is involved, plan on a second visit. We’ll tell you which category your job falls into before we schedule. Call (833) 842-7204.
A permit is only required when the vanity work moves or adds electrical outlets, which means GFCI protection per California code. A straight cabinet swap with no plumbing or electrical changes usually doesn’t require one. Because Inglewood’s permit office scrutinizes unpermitted legacy work hard, we keep permitted and unpermitted scope clearly separated in every quote.
Ready for a Real Number, Not a Guess?
Groundwork Construction Co. of Inglewood will inspect what’s behind your old vanity, price the full scope upfront, and back the work with the 730-Day Done Right Promise. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and we answer the phone with a live person 24/7. Financing and current promotions apply. Call (833) 842-7204 for a free estimate.
Written by the team at Groundwork Construction Co. of Inglewood, serving Inglewood, CA.
What Our Customers Say
"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett"We lived in the house through the whole thing. He kept the dust wall up, cleaned every Friday, and made sure we always had a working bathroom."
- Craig Whitaker"Change orders were written down and priced before the work happened, every single time. No surprise at the end."
- Keisha Robinson












