







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Lynwood, CA: What It Costs and How Long It Takes
A chain link fence in Lynwood, CA typically runs $3,500 to $9,000 for a standard residential lot, and most jobs wrap up in 1 to 3 days once materials are on site. You’re usually fencing 120 to 180 linear feet of yard boundary on a compact post-war lot, at 4 to 6 feet tall, with a walk gate and a drive gate. Call (833) 842-7204 and we’ll walk the property line with you, confirm setbacks, and give you a written line-item quote on the spot.
How a Chain Link Fence Goes In, Start to Finish

Chain link is one of the few fence types where the schedule is genuinely predictable. Here’s the real sequence we run on Lynwood properties, with the decisions you’ll need to make at each stage.
Stage 1: Layout and utility marking (half a day)
We walk the boundary with you and stake the corners, gate posts, and terminal posts. Before any digging happens, 811 gets called to mark gas, water, and electric. On Lynwood’s tight lots this step matters more than most homeowners expect, because a rear fence line often sits within a few feet of a garage slab or an existing sewer lateral, and nobody wants to find that with a shovel. You decide the exact line and gate placement here.
Stage 2: Demo and removal (half a day to a full day)
Old fencing comes out, posts get pulled or cut flush, and debris hauls off. If the previous fence failed because of a leaning post or a rotted wood rail, the ground underneath usually tells you why. Poor drainage, a broken sprinkler line, or root pressure. We note it so the new posts don’t inherit the same problem.
Stage 3: Post setting and concrete cure (same day, plus 24-48 hours)
Terminal posts, corner posts, and gate posts get set in concrete and braced plumb. Line posts go in on 8- to 10-foot centers, usually 10 feet. This is where the quality of the job lives: post depth, concrete volume, and bracing. The concrete needs to cure before tensioning, so a fence set on day one gets its fabric on day two or three. On a hot inland South LA summer day, we water the concrete caps so they don’t cure too fast and crack.
Stage 4: Fabric, top rail, and tensioning (one day)
Top rail gets run through the loops, the fabric is stretched with a come-along, and tie wires or tension bars secure everything. Tensioning is the step that separates a fence that stays tight from one that sags within a year. You’ll choose fabric height, gauge, and coating before this stage, not during it.
Stage 5: Gates, inspection, and walkthrough (a few hours)
Gate frames hang, latches and hinges align, and the gate swing gets checked for clearance and sag. If the job triggers a City of Lynwood permit, we walk the inspection. Then you get a final walkthrough, and we hand over any manufacturer documentation for the fabric and coatings.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Specs You’ll Choose Between
Chain link has fewer variables than most fencing, but the ones that exist move both the price and the lifespan. Here’s the honest rundown.
- Gauge of wire. 11.5-gauge is the residential standard and holds up well. 9-gauge is heavier and costs roughly 15% to 25% more but resists bending from dogs, kids, and foot traffic. On a fence near a driveway apron, heavier gauge pays for itself.
- Coating: galvanized vs. vinyl-clad. Galvanized steel is the cheapest and lasts decades indoors, but in Lynwood’s hot inland summers and seasonal winter rain, the coating takes a beating near the ground line. Vinyl-clad (usually polyethylene over galvanized core) adds cost, roughly 10% to 20%, and doubles the corrosion protection. It also gives you color options: black, green, and brown tend to read as less institutional than silver.
- Height. 4 feet, 5 feet, or 6 feet. Six-foot fencing raises material and labor, and in some Lynwood front-yard applications, taller fencing can raise a setback or sight-line question with the city. We’ll flag that before you commit.
- Post type and setting. Standard round posts set in concrete, or heavier schedule-40 pipe for gate posts. Gate posts carry the load, so we don’t skip heavy-wall on a drive gate. A cheap gate post is the number one cause of a sagging gate later.
- Gates. A walk gate and a drive gate are typical. Swing vs. slide depends on driveway clearance, which on older compact lots is often tight. Barbed wire and privacy slats are add-ons worth pricing separately.
What Chain Link Fence Costs in Lynwood, CA

Plan on $3,500 to $9,000 for a chain link fence in Lynwood. The low end covers a modest 100- to 120-foot run of galvanized 4- to 5-foot chain link with a walk gate. The high end covers 180-plus feet of 6-foot vinyl-clad fencing with a drive gate, heavy gate posts, and demo of an existing fence.
Here’s what actually moves that number:
- Linear feet and corners. Every corner and terminal post adds a set and a brace. A lot with six corners costs more than a straight 150-foot run at the same total length.
- Existing fence removal. Demo and haul-off of old chain link or wood fencing adds a line item. Deep-set or concrete-encased posts take longer.
- Post depth and soil. Lynwood’s older lots sometimes have compacted fill or old concrete from previous pours. Extra excavation is real labor.
- Gate count and gate weight. A drive gate with heavy-wall posts and a proper frame adds meaningful cost over a walk gate. Two gates triples the hardware.
- Permit and inspection scope. If the fence triggers a City of Lynwood permit or touches a setback question, permit pull and inspection time get priced in.
What’s included in a written estimate: labor, materials, post setting in concrete, demo and haul-away, gate hardware, and any permit pull scope we’ve discussed. What typically isn’t: sprinkler relocation, landscaping repair, and any grading or drainage work the fence line might need.
See the difference
Before
After
Before
After
Before
AfterWhat Lynwood’s Housing Stock Means for Your Fence
Lynwood is a fully built-out, pre-1960s inner-ring LA suburb. Nearly all fencing work here is replacement or repair on aging small-lot homes, not new-build site fencing, and that shapes every chain link job. Most lots are post-war 1940s and 1950s single-story stucco tract houses on compact parcels along a gridded street pattern, with attached or detached garages and a rear yard that often sits a few feet from a garage slab or a property line shared with a neighbor’s driveway. When we replace fencing here, we’re often digging into soil that’s held old concrete footings for decades, and we’re constantly working around tight setbacks. For a bigger rear-yard project that runs into grading, drainage, or utility trenching, homeowners often pair this with ADU Site Prep & Utilities in Lynwood.
The local climate adds its own factors. Dry, hot inland summers are hard on galvanized coating at the ground line, and seasonal winter rain can undercut a poorly set post within a single season. Santa Ana wind events put real load on a fence line, which is why we don’t skimp on braces and tensioning. If your full yard project includes replacing a gate that’s failing at the hinges, homeowners often pair this with Door Installation in Lynwood when the fence line ties into a garage man-door. For the wider scope of what we handle, see our Fence Installation service, and for the full project window, see Fence Installation in Lynwood.
As for permitting, Lynwood is a city where projects commonly require a City of Lynwood permit, and because the housing stock is older, work that touches the structure can trigger upgrades to current Title 24 energy and seismic standards that a newer neighboring city’s tract homes wouldn’t trigger. For chain link specifically, a standard fence that doesn’t touch the house usually falls below the permit threshold, but fencing that changes a property line, sits in a front setback, or borders a drainage easement can require one. We confirm during the site visit, never during the build.
Serving Lynwood, CA – Our Local Coverage Area
We serve Lynwood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Lynwood

Most chain link fence jobs in Lynwood finish in 1 to 3 days. Day one handles layout, demo, and post setting; concrete cures for 24 to 48 hours; the fabric and gates go in on the final day. Larger runs, permits, or heavy demo can push a job to 4 or 5 days. Call (833) 842-7204 and we’ll give you a written schedule with your estimate.
Often not, but it depends on the height and location. Standard residential chain link fencing under six feet typically doesn’t trigger a permit, but fencing in a front setback, fencing that changes a property line, or fencing bordering a drainage easement can. We confirm during the site visit and handle the permit pull if one is required. Call (833) 842-7204 to walk your property line with us.
Expect $3,500 to $9,000 for a residential chain link fence in Lynwood. A modest galvanized 4- to 5-foot run with a walk gate sits near the low end, while 6-foot vinyl-clad fencing with a drive gate and demo of an existing fence lands near the high end. Call (833) 842-7204 for an exact quote – estimates are free.
Not on our jobs. The written line-item quote is what you pay, and if we find an issue we didn’t anticipate (unknown buried concrete, a broken sewer line, an unmarked utility), we stop and price it with you before touching it. Upfront pricing, no surprises. Call (833) 842-7204 to schedule your free estimate.
Every job is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship on the fencing: post setting, tensioning, gate alignment, and any installation defect. Material warranties from the fence manufacturer pass through to you. Call (833) 842-7204 for a written warranty with your estimate.
Get a Free Chain Link Fence Estimate in Lynwood
We’ll come out, walk the property line, confirm setbacks and any permit triggers, and leave you with a written line-item quote for your chain link fence in Lynwood. No pressure and no vague bids. If your project also touches Lynwood garage conversions or yard work, we’ll flag it in the same visit. Call (833) 842-7204 to schedule your free estimate.
Written by the team at Groundwork Construction Co.












