







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Walnut Park, CA: What the Job Actually Involves
New cabinets and countertops in Walnut Park typically run $14,000 – $45,000 for a full kitchen, with cabinet installation alone at $4,000 – $13,000 and countertops at $2,000 – $6,500. Most jobs take two to four weeks from demo to final caulk, and the cabinets have to be ordered before anything gets torn out. Call (833) 842-7204 and we’ll walk your kitchen, measure it, and put a line-item number in writing.
From First Measurement to Final Caulk: How We Run a Cabinet and Countertop Job

Cabinet and countertop work is a sequencing job more than a construction job. Get the order wrong by a week and the whole kitchen sits half-finished while you wait on a fabricator. Here’s the order we run in Walnut Park, and where you make the calls.
Stage 1: Measure and layout (day 1, about 90 minutes)
We template the existing kitchen, check wall plumb and floor level, and confirm where the sink, range, and outlets land. Old bungalow walls in Walnut Park are rarely square, so we note where filler panels and scribe molding will be needed. You decide the cabinet layout here: box sizes, drawer stacks, whether the refrigerator gets a surround. Changing this later costs money and weeks.
Stage 2: Order and lead time (2 to 5 weeks, nothing happens on site)
Stock cabinets from a box store arrive in days. Semi-custom lines, including KraftMaid, run three to five weeks. Countertop slabs get selected in this window too, which matters because the fabricator needs the slab reserved before template day. You approve finishes and hardware now, not later.
Stage 3: Demo and prep (2 to 3 days)
Out go the old cabinets, countertop, and usually the backsplash. We cap plumbing, make safe the electrical, and repair any drywall or dry rot behind the old boxes. In Walnut Park’s older stucco-and-frame homes, this is where we find soft framing near the sink from a slow leak that’s been running for years. You decide whether to fix it properly now or after, and we recommend now.
Stage 4: Cabinet set and countertop template (3 to 5 days, then a gap)
Base and wall cabinets get leveled, shimmed, and screwed to studs, then the countertop fabricator templates on top of the installed boxes. Template to install is typically 7 to 10 business days for quartz or granite. This gap is normal. It’s also why nobody should promise you a finished kitchen in one week.
Stage 5: Countertop install, sink, and punch list (2 to 3 days)
The slab goes down, the sink and faucet get set, and we run the final trim, toe kicks, and caulk. You walk the kitchen with us and sign off. Anything on the punch list gets fixed before we call the job done, and the whole thing sits under our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make: Cabinets, Countertops, and Hardware
Most of the budget swings come from these decisions, not from labor. Here’s the honest version of each.
- Stock vs. semi-custom cabinets: Stock is cheaper and faster but limited to fixed sizes, which means filler strips in an out-of-square Walnut Park kitchen. Semi-custom (KraftMaid is a line we install) fits tight walls better and gives you drawer and door options. The trade-off is cost and a longer lead time.
- Cabinet box material: Plywood boxes hold screws and survive moisture better than particleboard, especially near a sink. Particleboard is fine in dry, upper cabinets and saves real money. Ask which one you’re getting in writing.
- Quartz vs. granite vs. laminate countertops: Quartz is non-porous and needs no sealing; it suits busy family kitchens. Granite is natural stone, unique per slab, and needs periodic sealing. Laminate is the budget play and holds up fine if you’re not setting hot pans down. Fabricators price by square foot plus edge profile.
- Slab thickness and edge: 2cm vs. 3cm slabs, and a eased edge vs. a built-up mitered edge, both move the countertop number. A waterfall or thick edge looks great and costs more in labor and waste.
- Drawers vs. doors: A drawer bank costs more per box than a door cabinet but changes how the kitchen functions day to day. Worth the money in a small Walnut Park kitchen where every inch counts.
What Cabinets & Countertops Cost in Walnut Park, CA

A full cabinet and countertop replacement in Walnut Park lands between $14,000 and $45,000. A cabinets-only swap runs $4,000 – $13,000; countertops alone $2,000 – $6,500. A kitchen island adds $3,000 – $10,000, and a backsplash $800 – $2,500 if you’re doing one at the same time.
What pushes a job to the low end: a small galley layout, stock cabinets, laminate or a modest quartz, and no plumbing or electrical changes. What pushes it to the high end:
- Kitchen size and cabinet count: linear feet of cabinetry drives most of the cost.
- Relocating plumbing or electrical: moving a sink or adding circuits means permits and trade work.
- Condition behind the walls: dry rot, old knob-and-tube wiring, or a floor out of level adds repair days.
- Material grade: semi-custom boxes and a premium slab versus stock and laminate.
- Permit scope: cabinet and countertop swaps often don’t require a permit, but plumbing or structural changes do.
A written estimate from us is itemized: cabinet line and box count, slab square footage and edge, labor, disposal, and permit fees where they apply. What it won’t include: appliance purchases, and any hidden damage found after demo, which we price separately and only with your approval. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Walnut Park Homes Specifically Do to This Job
Walnut Park is unincorporated Los Angeles County, ZIP 90255, so permits and inspections run through County Public Works and County building codes, not a municipal building department like neighboring Huntington Park or South Gate. That changes the workflow: plan check and inspection scheduling follow County timelines, and we plan around them rather than assuming a city counter. Because so much of Walnut Park is infill work on tightly packed lots, cabinet deliveries and slab trucks have to be staged carefully, and alley access is often the only practical route to the door.
The housing stock is the other factor. Most of what we open up here is 1920s to 1950s stucco bungalows and tract homes, many expanded over the decades with unpermitted additions. We regularly find early Romex or knob-and-tube wiring behind old cabinet runs, and dry rot under sinks where a slow leak has been working on stucco and wood framing for years. Those discoveries can add a day or two. It’s the nature of a kitchen this age, and we’d rather tell you upfront than surprise you mid-job. Homes here often pair a cabinet and countertop refresh with a Garage Conversion ADU in Walnut Park when the rear garage comes up in the same conversation, or a New Detached ADU in Walnut Park if the lot has room.
If the scope grows past cabinets and countertops into layout, plumbing, or flooring, that’s part of a full Kitchen Remodeling in Walnut Park project, and we’ll tell you honestly when it’s worth folding in. You can see our overall approach on the Kitchen Remodeling service page, and we cover the wider area on our Walnut Park page.
Serving Walnut Park, CA – Our Local Coverage Area
We serve Walnut Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in Walnut Park

Two to four weeks on site, but the full calendar from order to finish is usually five to nine weeks because of cabinet lead times and the countertop template-to-install gap. The on-site work is the short part; waiting on fabricated materials is the long part.
Usually no, if you’re swapping like-for-like in the same footprint with no plumbing, electrical, or structural changes. If you move a sink, add a circuit, or take out a wall, you do need a County permit, and we pull it and see it through inspection. Call (833) 842-7204 and we’ll tell you which side of that line your project falls on.
Yes, and it’s the most common way we do it. Keeping the sink and range where they are avoids permits and trade work and keeps the price toward the low end of the range. Moving plumbing is possible, but it turns a cabinet swap into a bigger project.
Cabinet installation runs $4,000 – $13,000 and countertop installation $2,000 – $6,500; a full kitchen refresh lands in the $14,000 – $45,000 range. Size, material grade, and whether anything behind the walls needs repair are what move the number. Call (833) 842-7204 for an exact quote, free and in writing.
Every cabinet and countertop job we complete is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it covers our install labor, not the manufacturer’s product warranty, which we’ll also hand you in writing.
Get a Free Estimate for Cabinets & Countertops in Walnut Park
Call (833) 842-7204 and a live person picks up, day or night. Tell us the kitchen size and what you’re hoping to change, and we’ll set a time to measure on site. You’ll get an itemized written estimate with cabinet counts, slab square footage, and labor broken out, plus a free design consult. Estimates are free, and the number in the quote is the number you pay.
Written by the team at Groundwork Construction Co.












