







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Westmont, CA: What the Job Actually Takes
Paver driveways in Westmont, CA typically run $7,000 – $18,000 for a standard single-car or short double apron, and most take four to seven working days from demolition to the final sweep-in of joint sand. The number swings on square footage, base depth, and how much old concrete has to come out. Call (833) 842-7204 and we’ll walk your driveway and give you a written, line-item estimate before anything gets ordered.
How we build this job, stage by stage

Stage 1: Measure, lay out, and confirm drainage (day 1, about two hours). We mark the driveway edges, check the slope away from the detached garage or rear workshop that most Westmont lots have, and confirm where water will exit. You decide the paver pattern and the border course here, because the border has to be ordered before excavation. On tight lots off 90047 side streets, we also settle where the crew stages material and the dumpster so you keep street access.
Stage 2: Demo and haul-off (days 1 – 2). Existing concrete, asphalt, or failed pavers come out with a skid-steer and hand tools around the utility stubs. A typical 400-square-foot driveway produces three to four dumpster loads, and we schedule hauling same-day so your driveway isn’t a wall of rubble overnight. This is where we find the surprises: roots from the ficus or jacaranda that cracked the old slab, or a shallow water line running to the rear garage.
Stage 3: Excavation and base prep (days 2 – 3). We excavate 8 – 10 inches for a residential driveway, then build a compacted crushed-stone base in two lifts, each run with a plate compactor and checked for grade. Base is the part nobody sees and the part that decides whether pavers stay flat in ten years. The county inspector, if the scope triggers a grading or right-of-way review, looks at this stage, so we don’t schedule paving until base compaction passes.
Stage 4: Setting bed and paver laying (days 3 – 5). A one-inch bed of washed concrete sand goes down, then the pavers go in over it, cut with a wet saw along edges and around utility lids. A 400-square-foot driveway is roughly two long days for a two-person crew. You pick the color blend and the banding here if you haven’t already.
Stage 5: Edge restraint, sand, and clean-up (days 5 – 7). We pin the edge restraint, sweep polymeric or regular joint sand into the joints, compact once more, and wash the surface. You get a walkthrough, and we leave the extra pavers for future repairs. That’s the whole sequence. If your driveway connects to a wider hardscape plan, it usually makes sense to run it as part of a full Driveway & Pavers in Westmont scope so the base and grades match.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The paver options you’ll actually choose between
Most of the decision happens before we break ground. Here’s what a Westmont homeowner picks from and the honest trade-off of each:
- Concrete interlocking pavers (the common answer). The workhorse choice for a residential driveway, and where most jobs land. 60mm thickness holds up to normal car and truck traffic. Wide color range, easy to pull and reset if a line ever breaks. Cost sits in the middle of the paver field.
- Clay brick pavers. Warmer look, longer color life, but pricier per square foot and heavier to lay, so labor climbs. Genuinely good on the 1920s – 1940s bungalows where an older aesthetic fits the house.
- Permeable pavers. Open joints or a gapped system that lets water drop through into a gravel reservoir. Worth it on the flat Westmont lots that pool after a heavy winter storm, since it reduces runoff. Needs a deeper base, so it costs more and takes an extra day.
- Paver thickness and base depth. 60mm is standard for cars; 80mm and a 10 – 12 inch base is what we run where a heavy truck or oversized load parks regularly. Thicker and deeper costs more in materials and excavation but ends the rutting.
- Pattern and border. A running-bond or herringbone field with a soldier-course border reads clean and holds its line over time. A pattern with tight curves means more cutting, more waste, and more labor.
- Color and finish. Tumbled or matte finishes hide tire marks and dust better than a high-polish surface on a driveway that sees daily use.
What Paver Driveways cost in Westmont, CA

Plan on $7,000 – $18,000 for paver driveway installation in Westmont. The low end covers a short single-car apron with a standard concrete paver and an existing base that can be salvaged. The high end is a full double driveway, thicker pavers, a permeable system, or a site where the old concrete has to go and the base has to be rebuilt from scratch. Here are the variables that move the number:
- Square footage. The single biggest driver. Price climbs roughly by area, plus a jump at the edges where cutting and waste rise.
- Existing condition and demo. Removing a sound slab costs less than breaking out a failed, heaved, or root-cracked one. Hidden root or utility surprises add labor.
- Base depth and soil. Flat, well-drained lots with stable subgrade need less excavation. A lot that holds water needs extra base and drainage work.
- Paver grade and material. Concrete pavers sit lower per square foot than clay brick. Permeable systems cost more because of the deeper base and reservoir.
- Permit scope and right-of-way. Where the driveway meets the street, a right-of-way or grading review can add fees and a required inspection before paving.
Your written estimate itemizes demo, haul-off, base, bedding sand, pavers, edge restraint, and permits, so the number you see is the number you pay. We back the workmanship with our 730-Day Done Right Promise, and calls are answered by a live person 24/7, so a question after the crews leave doesn’t wait until Monday. Homeowners often pair this with Door Installation in Westmont to finish the front of the house, or with Cabinets & Countertops in Westmont if the whole property is getting a once-over. If the drive is part of a bigger hardscape plan, our Driveway & Pavers service covers the full scope.
See the difference
Before
After
Before
After
Before
AfterWhat Westmont homes specifically do to this job
The single biggest thing that trips up paver driveway work in Westmont isn’t the pavers, it’s the jurisdiction. Westmont is an unincorporated Los Angeles County island wedged between the City of LA neighborhoods of Vermont-Slauson and Harvard Park, so construction here runs on LA County Department of Public Works and County building-and-safety permitting, not City of LA LADBS. Addresses read 90047 and look identical to LA, but the permits are county. A homeowner on one side of a street may need county permits while a neighbor across the line needs LADBS, and we regularly see contractors show up with the wrong jurisdiction’s plans. That’s a delay and a re-review you don’t want mid-job.
Then there’s the housing stock. Most Westmont homes are original 1920s – 1940s wood-frame bungalows and small stucco duplexes on tight lots, with detached garages at the rear of narrow driveways. The old concrete apron is often heaved or cracked from tree roots and decades of settling, and the narrow width means the driveway is also the walkway, so we plan staging around it. The warm, dry near-coastal-inland climate lets us pave year-round, but the long dry season and Santa Ana wind events mean dust control matters while we’re cutting and breaking, and the rare heavy winter rain exposes the flat, poorly-drained lots where a permeable or extra-base system pays off. If your prioject touches the rear garage or a workshop, we also handle Westmont homes of every era, so the grade and drainage get planned with the whole lot in mind.
Serving Westmont, CA – Our Local Coverage Area
We serve Westmont and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Paver Driveways in Westmont

A standard single-car or short double paver driveway takes four to seven working days from demolition to final sand. The base prep and compaction are the longest stage, and a permeable system or a lot that needs drainage work can add a day or two. Call (833) 842-7204 for an exact timeline after we see the site.
It depends on the scope and whether the work reaches the street right-of-way or changes grading. Because Westmont is county territory, we check with LA County Department of Public Works and County building-and-safety rather than LADBS before we order materials, so the permit is pulled under the right jurisdiction. Call us and we’ll confirm what your specific driveway needs.
Sometimes, if the existing slab is sound and the grades allow a paver layer on top, but most Westmont jobs skip the overlay because a failed base underneath will just crack the new pavers. We only overlay when the base is verified. Call (833) 842-7204 to schedule a look and we’ll tell you straight which way makes sense.
Most paver driveway installation in Westmont runs $7,000 – $18,000, with the range driven by square footage, base depth, paver grade, and demo. We give a written, line-item estimate with no change orders for scoped work. Call (833) 842-7204 and estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise, backed in writing, one of the longest guarantees in the residential construction space. If something we installed isn’t right, we make it right. Call (833) 842-7204 with any warranty question and a live person will answer, day or night.
Get a free on-site paver driveway estimate in Westmont
Call (833) 842-7204 to schedule a free on-site estimate for paver driveways in Westmont. We’ll measure the driveway, check the base and drainage, confirm whether county permits apply, and hand you a written line-item quote with the paver options priced out. A live person answers around the clock, and we’ll book a time that fits your schedule.
Written by the team at Groundwork Construction Co.












