







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterCustom & Geometric Windows in Inglewood, CA
Custom and geometric windows are made to a specific opening and shape rather than pulled from a standard size chart: arches, half-rounds, trapezoids, circles, ovals, angled corner units and full walls of glass. Homeowners across Inglewood ask for them when a stock window leaves an awkward gap, when a room needs more daylight, or when the front of the house needs something with real presence. We build and install them as part of our full Windows & Doors service, and we do it with the same written guarantee that covers every project we take on.
Inglewood has a housing stock that makes geometric windows worth thinking through carefully. The city’s mix of 1920s Spanish Revival bungalows, postwar ranch homes and newer infill means the opening you’re dealing with is rarely square, rarely level and almost never the same as the one two blocks over. We measure what’s actually there, not what a catalog assumes, and we price the whole job in writing before anyone touches a wall. Call (833) 842-7204 and a live person picks up, day or night, to start the conversation.
Key Takeaways
- Custom and geometric windows are built to your exact opening and shape, not trimmed down from a standard size.
- Most Inglewood arch, round and angled window projects run roughly $1,100 to $4,800 per opening, with larger glass walls going higher.
- Every installation is backed by our 730-Day Done Right Promise, in writing.
- Financing at 0% for 18 months and $1,000 off projects over $10,000 are standing offers, not limited-time hooks.
- We answer the phone 24/7 with a real person, and every technician arrives background-checked and in uniform.

When You Need Custom & Geometric Windows
You don’t need a custom window because a magazine said so. You need one when a standard unit can’t do the job, or when the room is asking for something a rectangle can’t give it. Here are the situations we run into most in Inglewood.
- An arched or angled opening a stock window can’t fill. Plenty of the older homes in Inglewood have arched transoms over doors, angled bays, or half-round openings above the entry. A rectangular unit leaves you with a framed-over gap or a clumsy filler panel. A made-to-shape window closes the opening cleanly and lets the light through.
- A room that’s dark no matter what you do. North-facing rooms off the rear of the house, interior hallways that borrow light from a side wall, and stairwells that feel like a tunnel. A circle, an oval or a stack of geometric units moves daylight deeper into the plan than a single wide slider can.
- A street-facing facade that reads flat. The stretch of homes along the corridors near downtown Inglewood and up toward the hills has a lot of flat stucco frontage. A pair of arched windows or a clustered geometric bank gives the front of the house real definition without adding square footage.
- A remodel that’s opening a wall. When you’re taking out a wall between a kitchen and a dining room, or pushing the rear of the house into the yard, the new opening is a chance to put in a shaped window or a corner glass unit instead of another standard slider. We coordinate that with the rest of the build so the framing and the glass are designed together.
- A replacement job where the original was custom. Original shaped windows from the 1920s and 1930s fail at the frame and the seal long before the glass does. If a shaped window is fogging, sticking or letting in air, you’re usually looking at a new custom unit matched to the original opening, not a patch.
- An addition or ADU where you want the new work to look intentional. A rear addition gives you the chance to design a window wall or a shaped highlight that reads as deliberate rather than leftover. We plan it with the addition, not after it.
Our Custom & Geometric Windows Process
Custom glass is where sloppy measurements get expensive fast. A half-inch error on a standard window is a shim; a half-inch error on a shaped unit is a remade window and a delayed job. Here’s how we keep that from happening.
- On-site measure and template. We measure the actual opening, not the drawing. For arches, radii and angled corners we template the shape so the manufacturer builds to the real thing. We also check the wall assembly, the surrounding framing and how the unit will flash and seal before we commit to a design.
- Design and material selection. We walk you through frame material, glass package (low-E, laminated, tempered where code requires it), interior finish and grille pattern. For that work we draw on brand partners like Andersen and Pella on the window side, and finish trim that plays well with the rest of the house. You see the spec in writing before you sign anything.
- Written upfront pricing. You get a line-item bid: window cost, labor, framing adjustments, flashing and waterproofing, trim, paint touch-up, permit fees if they apply. The number you see is the number you pay. No surprise line items after the wall is open.
- Permits and lead time. Shaped and custom units often trigger a permit and a longer manufacturing lead time than stock windows. We handle the permit side and give you a realistic install date up front so you’re not planning around a guess.
- Installation by background-checked technicians. Frames are set plumb and square, flashed and sealed correctly, and insulated at the rough opening. Everyone on the job is background-checked and arrives in uniform. Most single-window jobs wrap in one visit; multi-unit and wall-opening jobs are scheduled to minimize time with the house open to the weather.
- Final walkthrough and the 730-Day Done Right Promise. We walk the finished work with you, check operation and seals, and leave you with the written guarantee. If something isn’t right in the first two years, we come back and make it right. That’s the whole point of putting it in writing.

Custom & Geometric Windows Pricing in Inglewood
Custom and geometric window pricing in Inglewood generally runs $1,100 to $4,800 per opening installed, with large arched units, radius walls and full glass walls climbing above that. The shape, the frame material and the glass package drive most of the number, not the labor. Here’s a realistic breakdown of what you’re paying for.
| Item | Typical Inglewood range |
|---|---|
| Single custom rectangular window (installed) | $900 – $1,600 |
| Half-round or arched transom (installed) | $1,100 – $2,400 |
| Circle or oval feature window (installed) | $1,400 – $3,200 |
| Trapezoid, angled or gable-end unit | $1,800 – $3,800 |
| Corner or cluster geometric bank (per opening group) | $2,800 – $6,500+ |
| Framing and structural adjustment | $400 – $2,200 |
| Permit (where required) | $150 – $600 |
What moves the number:
- Glass package. Standard clear glass sits at the low end. Low-E, laminated, tempered (required near doors and at floor level) and impact-rated glass add cost. We tell you which ones your Inglewood project actually needs and which are optional.
- Frame material. Vinyl is the most economical. Wood, aluminum-clad and fiberglass cost more and last longer. We work with trusted partners like Andersen and Pella on the window side, and finish details that pair with brands like CertainTeed and Sterling where they apply to the same project.
- Shape complexity. A rectangle is a rectangle. A radius, a multi-panel arch or a custom gable shape takes more templating, more manufacturing time and more care at install.
- Wall condition. Old framing, rotted sheathing at the rough opening, or a wall that needs structural work before the window goes in. We check this at measure so it lands in the bid, not the surprise column.
- Number of units. A single feature window is one thing; a matched bank of three across the front of the house is a different project. Bundling brings the per-unit number down.
Every estimate is free, and it’s the actual number. We don’t quote low and find reasons to add later. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available so a larger window project doesn’t have to wait for a cash pile. Call (833) 842-7204 for a free estimate and design consult, and you’ll get a real number in writing.
Why Homeowners in Inglewood Choose Groundwork Construction Co.
The window industry has a reputation problem, and most of it comes from three things: vague bids, crews that vanish mid-job, and warranties that turn out to have fine print. We built our process around eliminating all three. Upfront pricing means the number you see is the number you pay. Background-checked, uniformed technicians mean the people in your home are verified and professional. And the 730-Day Done Right Promise is one of the longest workmanship guarantees in residential construction: if it isn’t done right, we make it right, for two full years.
We’ve been in business since 2014 and proudly serve local communities across our markets, including Inglewood. Our technicians have up to 12 years of experience, and they’re matched to the job so a shaped window or a corner glass unit goes to someone who’s installed one before. We’re a full-scope construction partner, from foundation to finish line, which means if the window project uncovers a framing issue or a waterproofing problem, we can handle it rather than hand you off to a second contractor and a second bid.
We’re also not a company that only sells windows. Our seven core service lines cover kitchen remodeling, bathroom remodeling, roofing, windows and doors, fence installation, driveway and pavers, and home additions and ADUs. That matters when a window project touches the roof, the siding or the wall assembly. One team, one warranty, one point of accountability.
A note on safety and code
Any work that opens an exterior wall carries real risk: falling from height, structural loads, and water intrusion that can rot a wall for years before you notice. Windows above the first floor, gable-end units and full-wall openings need proper fall protection, correct flashing and code-compliant safety glass. We handle all of that as a matter of course, and we don’t recommend homeowners take the install side on themselves. Structural and height work belongs with trained, insured professionals.
FAQs – Custom & Geometric Windows
How much do custom and geometric windows cost in Inglewood?
Custom and geometric windows in Inglewood typically run $1,100 to $4,800 per opening installed, with shape, frame material, glass package and wall condition driving the final number. Large arched units, corner banks and glass walls go higher. Call (833) 842-7204 for a free estimate in writing; the number you see is the number you pay.
Can you install a custom arched or round window the same day?
Not usually, because custom and geometric units are manufactured to your exact opening and lead times are typically several weeks. The installation itself is usually a single-day job once the window arrives. We give you a real install date at the bid stage, not a guess, and we schedule around your household so the wall isn’t open longer than it has to be. Call (833) 842-7204 to get your lead time.
Is it cheaper to repair or replace a shaped window?
It depends on what failed. If the glass is intact and the frame is sound, a repair can be the right call and cost a few hundred dollars. If the frame is rotted, the seal is gone or the glass is fogged, replacement is usually the better value because the new unit comes with a warranty and the old one doesn’t. We’ll tell you honestly which one your window falls into; call (833) 842-7204 for a free assessment.
Do custom windows require a permit in Inglewood?
Often yes, especially when the work changes the size or shape of an exterior opening, alters structural framing, or affects egress. Simple like-for-like replacements in the same opening sometimes don’t. We check the specifics of your project, handle the permit side where it’s needed, and include the cost in the written bid so it’s not an afterthought. Call (833) 842-7204 and we’ll tell you what applies to your home.
What is the 730-Day Done Right Promise?
It’s our written workmanship guarantee: if the work isn’t done right within the first two years, we come back and make it right. It covers our installation on custom and geometric windows the same way it covers every other project we take on. That’s not a marketer’s line, it’s a contract term; we put it in writing at signing.
Do you offer financing on larger window projects?
Yes. 0% financing for 18 months is a standing offer, and projects over $10,000 qualify for $1,000 off. Both apply to multi-window, full-bank and glass-wall jobs where the total crosses the threshold. Call (833) 842-7204 and we’ll walk you through the numbers and the options.
Ready to Talk Custom Windows in Inglewood?
Custom and geometric windows are a real upgrade when they’re done right: more daylight, a facade that reads as intentional, and a front of house that doesn’t look like every other one on the block. They’re a headache when they’re measured wrong, flashed wrong or installed by someone who didn’t template the shape. We handle the whole thing, from measure and template to permit, install and the 730-Day Done Right Promise, with upfront pricing and a live person on the phone whenever you call.
Call (833) 842-7204 for a free project estimate and design consult. We answer 24 hours a day, 7 days a week, with a real person, not a voicemail box. And for the full picture on everything we do with windows and doors, including related services and our other local coverage, start at our home page.
Written by the team at Groundwork Construction Co. of Inglewood, serving Inglewood.


